What to Expect From an Asbestos Removal Project

Posted by cleancutabatement on May 18th, 2019

Asbestos is dangerous, particularly when you have a remodeling project happening. During a home or industrial remodeling project, the Asbestos can become friable by wear and tear, grinding, sanding, and demolition. Remember, it isn’t just in the attic insulation. It can be found in your pipes, floor tile, and other places you may not expect. If you are moving it or handling it in any way, there’s a chance these particles get into the air. If you are remodeling, it is recommended to use a licensed contractor for Asbestos tile removal in Bloomfield, MI to deal with the Asbestos safely.

There are actually two options: a complete Asbestos tile removal in Bloomfield, MI or encapsulation. Obviously the best thing to do is to remove the Asbestos from the area all together, but this sometimes is not possible. You see, not only is it extremely hazardous, but it is also very fragile because it’s been there for decades. If removal is not an option, the next step is to encapsulate the Asbestos. Encapsulation creates an enclosure which prevents the fibers from escaping and entering the air. Those who handle this type of project are trained in safely handling, removing, and disposing of hazardous materials.

A professional team will come in and help you with issues concerning Asbestos in residences and business buildings. When they come, you can expect their work to be done in four steps:

Step #1 Preparation is key for this type of job. First, they remove everything from the room, like furniture, rugs, clothes, and anything else that can be taken out of the way. Next, they install covers over everything that stays put, like walls, floors, and doorways. They use thick polyethylene sheeting and use duct tape to hold it in place and seal it. They also turn off all the heating and cooling systems, close all windows and vents, and seal them as well. No Asbestos can escape! The last bit of prep work is to hang a sign up that will let anyone know of a potential Asbestos exposure risk.

Step #2 The vinyl Asbestos tile removal in Bloomfield,MI process now starts. After removing all of the Asbestos possible, the trained technicians spread the encapsulant over the surface of the Asbestos to ensure that no remaining particles will be released.

Step #3 It is time to cleanup! The technicians remove the plastic from the walls and floor, rolling them carefully inward so that any Asbestos particles are captured in the middle and are not carried out into the room. All plastic is double-bagged and sealed. After it is moved up to the airlock, a clean wet rag and soapy water are used to wipe anything down that might have been exposed to Asbestos dust. To complete the Asbestos removal, the Asbestos and all of the contaminated waste is taken it to an EPA-approved landfill.

Step #4 Lastly, a third-party company comes in to test the air quality and ensure that absolutely all of the Asbestos is either removed or totally encapsulated. You will know for sure that you are breathing in clean air!

Whether it is the tile under your feet, the insulation in the attic, or the pipes bringing you hot water, nearly anything in an older building could contain Asbestos. It doesn’t need to stay that way, though. Call in a team of trusted professionals and have your risk for Asbestos-related diseases reduced down to nothing!