How to Choose Stump Grinding Brisbane Southside

Posted by Heath Seo on May 22nd, 2019

Introduction

Stump grinding is a process, by which the tree-sump is reduced to fine pieces of wood till the roots. The contractor will remove these pieces and fill the hollow space with soil and mulch. The tree roots will naturally decay and become a part of the soil. The process of complete tree removal will become simple and affordable. The process is performed as a final stage of tree removal after the rest of the parts are removed. You can avail the services from the contractors of stump grinding Brisbane Southside.

Stump Grinding Vs Stump Removal

Gum tree can grow to a size of 22 feet in diameter and high-density stump. Removal involves the stump as well as the root ball of the tree. Together, they can be very tough to remove. You will need high powered tools and equipment and work for many hours (even days) to cut through them. On the other hand, stump grinding requires relatively smaller equipment. It takes less time and effort to grind. The results are very accurate and practical. Now, you don’t even need to remove the root. Natural decaying will take care of complete tree removal.

Stump Grinding Methods

Steps

  •  Clearing the stump base
  •  Stump trimming
  •  Choosing the right grinding tool
  •  Grinding the stump

Clearing the Stump Base

The stump will be surrounded by bushes, stones, hard soil, and other debris in your garden. You need to clear them completely to create sufficient space around the stump. You can do it with the traditional shovel. Take your time to clear the debris, because it has to be done completely. You may also use the power driven tools to make the task easier.

Stump Trimming

Trimming will help to remove most of the brittle parts around the stump. It could be a slow process, but you can speed up with the help of a power chainsaw. It is very important for you to take protective steps while doing it. You have to wear a pair of arborist gloves, eye protection gear, ear protection gear, and a helmet.

  •  Stand close to the stump
  •  Change your position around the stump as you trim
  •  Avoid looking over the stump at a vertical angle
  •  Trim for three minutes and stop
  •  Take a break for two minutes
  •  Inspect the results and see how much more you have to trim
  •  Stop when the resistance from the trunk becomes high

Choosing the Right Grinding Tool

A compact stump grinder can be in the handheld model. It will be the size of a lawn-mower. It is usually used in home gardens. If the stump size is too large, you may need a truck or tractor mounted stump grinder. You can also find various brands of products on the market if you want to buy one. Or you can borrow a stump grinder from the professional arborist near to your home. You have to inspect the tool for some of the aspects specified below.

  •  Check the blades) for sharpness
  •  Make sure blade is free from rust and corrosion
  •  Check the hydraulic cylinder for damages
  •  Check the wheel for proper alignment and quality
  •  Check carbide tooth for damages
  •  Check all the washers, nuts and retainer straps for wearing and damages
  •  Check the safety warning parts

Once you are satisfied, you can hire the equipment and bring it home for the stump grinding project.

Grinding the Stump

 Your first task is to locate the front edge of the stump. It will be the starting point for your grinding. Find the wheel on your grinder and align it vertically with reference to the front edge. Now, the blade will face the stump at the bottom layer. Turn on the switch and start grinding slowly.

Keep pushing along the length and deep into the stump. You can continue to do it as the small chips from the stumps keep coming out. Use the grinder for 3 to 4 minutes at a stretch. Take a break for 2 minutes and check the results. Continue to grind until the stump and root ball of the tree gets chopped to fine pieces. Now, you can fill the hollow space with fresh soil.

Summary

If you are new to stump grinding, it may be a complex task. You may have to face the risks of injuries while trying to use the equipment without training. You can try practicing it on pieces of wood in your backyard garden. Read the user instruction manual and follow the safety procedures. You should also wear protective gears as required.

On the other hand, you can search for a professional Tree removal Logan expert on the local directory. Choose the best among them and simplify the task of tree stump grinding.

Like it? Share it!


Heath Seo

About the Author

Heath Seo
Joined: April 6th, 2019
Articles Posted: 9

More by this author