Top Signs That Show That Your Well Pump Might Be Heading For Failure

Posted by Midwest Valves on June 12th, 2019

Most modern well pumps, like those produced by Onga pumps in Australia, are truly robust machinery pieces that are designed to function under trying conditions. When sized properly, your well pump should function efficiently for between 8 and 10 years at least before you begin considering a replacement. Unfortunately, unless you put the original pump in, the majority of homeowners lack sufficient information to understand their pump’s age and whether it might need to be replaced as a result of age. That’s why it’s crucial to know the top signs of imminent pump failure. This article offers three to watch out for.

1. Lack of water flow from fixtures

This one is quite obvious. If there is no water coming into the home from the well, and the well hasn’t gone dry, then it is most probably a pump problem. Begin by first checking out your circuit breaker. Turn the pump off. Reset your breaker before turning the pump on again. If it starts to function, then you are maybe fine. But if it does not, or it blows the breaker again, then you need to have it checked by your area’s well water expert.

2. Poor water pressure

Water pressure issues can actually be brought about by several and varying factors that include scaling from low levels of water at the well, hard water, or a problem with your pressure tank, that is found on the inside of your system’s pipes. It could also be as a result of the pump which, you probably got from a foremost Onga pump supplier partially losing its efficiency and being unable to draw as much water as it has always drawn in the past, from the well.

3. The pump keeps running constantly

This could probably be the sign of a problem with your pressure tank, or it could be a sign that is showing that the pump is unable to efficiently draw water from the well and it keeps on running constantly so as to keep the home fully supplied with fresh water.

Troubleshooting your system to know whether or not you need a replacement

Frequently, the best and most efficient solution is to get in contact with your area’s well water expert when you initially identify that you have a problem. The professionals can quickly assess your situation and narrow down the focus to discovering the issue. If you will like to first check before you incur the expense of any home visit, here are a couple of troubleshooting tips you can always try. As a rule of thumb, none of these three listed issues causes any water.

• Well failure: Low water supply due to drought or any other cause.
• Equipment failure: Pump problems, pressure pump problems, or even a power failure.
• Plumbing breakdown: Broken or clogged pipes.

A well-maintained and properly sized well water pump, such as options from Onga pumps in Australia, should offer several years of dependable service. If you notice any among these signs, it could mean that you need to replace your well pump. You can always troubleshoot the issue yourself first, but contact an expert if you’re unsure.