Brief Introduction of POE Power SplitterPosted by Henry Cheng on June 22nd, 2019 POE power splitter is relative to POE power supply. POE power supply is a combination of data signals and power, so POE power supply is also called POE combiner. The working process of POE separator is just the opposite, which separates data signal from power. If the data terminals such as Internet Camera (IPC), Wireless AP, IP Phone support POE power supply by themselves, then the POE separator is not needed for wiring, and the power supply of the direct network line is enough. POE is mainly used for PSE devices such as POE switches and POE power supply, but the devices connected to the lower end do not support POE occasions. POE separator separates power supply into data signal and power. There are two output lines, one is power output line, the other is network data signal output line, that is, ordinary network line. The power output has 5V/9/12V and so on. It can match various DC input non-POE receiving terminals and support the standard of IE802.3af/802.3at. The data signal output line, i.e. the ordinary network line, can be directly connected to the network port of the non-POE receiving terminal. Like it? Share it!More by this author |