Features to look into when purchasing drives for industrial use

Posted by Ainsley Aiken on July 4th, 2019

In the present time, speed drives that are adjustable types, are being used for various industrial applications. This is also an important accessory for machines that require precise speed control. Using the best drive, it is possible to ramp down or up to the motor speed.

Drives are devices that can easily be regulated for their speed. An industrial drive is a piece of device that effectively controls the motor speed without actually controlling the energy flow.

 A reputable controller is used as per the demand either to increase or decrease the speed. This simple process is considered as being efficient as it helps in saving nearly 70 percent of the energy. ABB drives are such devices that offer with numerous uses for users.

Some of them are mentioned below;

  • Regulated startup current flow

One major advantage of using high-grade industrial drive is that it helps in regulating the current flow through the system at the startup. This means that even at startup, the motor is geared to take a full load. This is done by the flexing action of the motor that is run by the current flowing through it. So at the time of startup, the motor is tuned at zero frequency. This action simply extends motor life to a much greater extent.

  •  Eliminate disturbance on account of power line

The moment you start the motor for a full load, it is obvious that a load of current is drained. This makes the voltage to sag and drop, and this, in turn, could damage any sensitive equipment that is connected across the line. When making use of an adjustable ABB industrial drive, the problem of voltage sag is taken control by maintaining zero voltage.

  • Less power during startup

In case the power and current are proportional at the time of startup, then the startup power is much higher than normal. As more power is generally required during startup for the motor to take the full load, so using an industrial drive certainly is beneficial. An adjustable type will ensure that the voltage during startup can be maintained fixed as well as variable type, depending on the requirement.

  • Regulated acceleration

The moment you start an industrial drive; its speed is much slower. Later during the process, it speeds up gradually. The increase in speed can be regulated by the operator using a simple control button. The ABB drive is designed to overcome any wear and tear that may be caused at the time of overload of current voltage.

Source URL: https://bit.ly/2HNhMTb

Like it? Share it!


Ainsley Aiken

About the Author

Ainsley Aiken
Joined: March 31st, 2017
Articles Posted: 608

More by this author