7 Must Follow Tips for Improving Chiller Efficiency

Posted by panchalrahul on July 15th, 2019

Wondering how to improve the efficiency of the Refcon chillers? You need to consult with an expert who helps you with all good suggestions and thus you can now handle the stuff in the right way.

Tips to Follow Increasing the Efficiency of Chillers

Here are given the easy tips following which you can increase the efficiency of chillers:

Keep Tubes Clean

High heat transfer comes up as the fundamental feature improving the efficiency of chillers. The large chillers turn out with large evaporator tubes that bring in better functionality and thus you get familiar with all positive aspects. Sometimes, the tube gets blocked with contaminants such as minerals, mud, scale, algae, etc. and thus the efficiency of the system declines suddenly.

Managing Water Velocity

It’s important to maintain a close water velocity, as too low the speed of water reduces the performance of chiller and it gives rise to laminar flow. It’s good to keep the minimal flow rate near to 3ft per second. On the other hand, too high the flow of water would cause vibration, noise and erosion of the tube and thus you need to take care of the water velocity ensuring that you avoid any erosion of the tube.

Knowing About Refrigerant Charge

You need to control the amount of refrigerant moving through the compressor per unit time. If the refrigerator leaks moisture and water would decrease the performance of the chiller.

Treating the Water

You need to maintain a proper water treatment that’s necessary for all condenser water loops. It eradicates the growth of algae and also removes corrosion due to which the system functions perfectly.

Installing VFD/VSD Drive

Variable speed drives reduce the overall inrush current into the system and thus you can now control the electrical load. It makes your system work properly and you get the ultimate safety.

Check the Compressor Oil

It’s good to carry out a spectrometric chemical analysis of the compressor lube oil learning the moisture content, metals, acids and other components that help you to use the stuff in your way. Contaminants may affect the functionality of the oil and you need to replace it immediately in order to avoid any future complications. Usually, high moisture content indicates a purge unit problem and you need to take care of the condition ensuring that the chiller functions properly.

Modulating Speed

A chiller motor turns out as the largest single wiring device in a building. Hence, you need to hire an expert electrician who handles the wiring efficiently ensuring that you carry out a safe installation of the chiller. You can use the speed controllers that help in loading the inlet vanes and they come up with a good capacity.

Nowadays, you can find manifold industrial chiller manufacturers and you can now choose the suitable option according to your needs. In this regards, you can search the classifieds from where you can get the names of companies producing industrial chillers.

Once you find a reputed chiller manufacturing company you can opt for the chillers featuring all modern technologies. Ensure that you hire an expert professional handling a successful installation and you can thus get rid of all confusions.