What are the ways to eliminate Printer is in an Error State issue?

Posted by Elena Gilbert on July 16th, 2019

When an HP printer is in an error state then instead of taking tension, just follow the below mentioned measures to eliminate this issue once and for all.

It is quite common for an HP printer user to encounter Printer Is In An Error State issue. There are lots of issues that HP printer users might bump into while using their printer but printer is in an error state is one of the most common issue that became a headache for many users. However, users don’t need to take tension about this issue, as there are effective solutions or steps to resolve this issue.

HP printers are very well-admired computer accessories but they are also one of the most prone machines to issues. Printer is in an error state is a problem or error code that basically appears when the system of user gets a new update that results in the connected printer to prevent doing its job.

Some of the possible reasons for the occurrence of Printer is in an error state issue:

When an HP printer suddenly stops printing documents and shows an error message that says, HP Printer Is In An Error State then users need to fix their printer as soon as possible. This is in an state that hinders printer from responding to the print commands.

The main causes behind this error are:

  • An inappropriately connected USB cable
  • Owing to some operating system issues
  • Due to issues related to connection with wireless, USB, Bluetooth and wired.
  • Outdated or damaged driver

If anyone is looking for some effective solutions to eliminate this issue, then they can give the below noted solutions a try. The provided solutions will surely assist in fixing Printer In Error State issue once and for all. 

Troubleshooting measures for resolving Printer is In Error State issue are:

Check the Connection of printer and attempt to restart the device

  • Make sure there is an appropriate connection between the computer and printer. Also, ensure that the connection is working properly and all the connected devices are functioning in an efficient manner. The cable that is used to make connection shouldn’t be faulty or damaged.

Make sure paper is loaded adequately

  • Before printing, users need to make sure that there is enough paper loaded in the printer tray.

Hardware Self-Test

  • Open and close the cover of the printer five or six times very quickly to perform the hardware self-test with HP printer. 

Unplugging the Cable

  • Users need to unplug the connected cable on both ends and after a small interval of time, re-plug it. After that, try to print a document.

Uninstalling Software

  • Uninstall each and every driver or software available for the HP printer. Once all done, then install them one by one in order to eliminate HP Printer in an error state issue.

Rebooting the PC

  • If all the above noted steps fail then user must try rebooting their PC.

Launch Troubleshooter

  • Connect printer properly with power supply and then run a windows troubleshooter to fix this issue.

Run printer troubleshooter

  • If windows troubleshooter doesn’t fix problem, then try running printer troubleshooter.

Check if printer is online or not

  • From the control panel, check whether printer is online or not.

Hopefully, these steps will solve HP Printer In Error State issue. If the issue still not resolved, then users need to contact online support executives for additional support.

Source Link-

https://www.merchantcircle.com/blogs/hp-support-pro-alpharetta-ga/2019/7/Online-Troubleshooting-tips-to-fix-Printer-in-Error-State-/1712394

Like it? Share it!


Elena Gilbert

About the Author

Elena Gilbert
Joined: June 21st, 2019
Articles Posted: 1