Posted by sharif on August 7th, 2019
It is made from high grade standard scaffolding tubes and finds its application in creating the support or uprights used in the structure. This product forms a location for ledgers and transoms and consists of a series of V-pressed welded components. It can be availed along with an integral wedge spigot or as an open ended variant.
• Quickwedge Ledger/Horizontal
The scaffolding tubes with wedge fixing devices are used to manufacture this component, which is placed in the uprights or standards longitudinally. They can be used inside as well as outside of the scaffolding in WA - at platform level inside and as guardrail outside.
• Quickwedge Transom
Used to form a frame as well as to fix the inner & outer standards transversely while being used in conjunction with V-pressed verticals, these transoms are T-sections that possess wedge-fixing components at the ends.
• Quickwedge Return Transom
It is a product that is made from steel-pressed components with the purpose of being placed alongside a ledger to form a 90O angle of return in the scaffold, and possesses specialized spaces on one side for steelstage or timber battens.
• Ladder Access Transom
It is a simple part that is used to create an easy mode to access the platform through ladders. This component links the coupler to one ledger while the 'C' is placed on the opposite ledger and the batten boards are secured alongside the transom.
• Scaffolding Bracing
It is used to form a facade bracing by securing its pivoting captive wedge fittings, which are welded at each end to the V-pressing of the verticals/standards.
• Stage Bracket 1/2/3 Board
• Tie Bar
It is a long, angled iron bar that is equipped with a dowl at both ends to link stage-brackets with each other.
• Toe Board Bracket
It is clamped to the verticals located at the end of the staging system to fasten the timber or steelstage end toe board
Like it? Share it!
About the Authorsharif
Joined: August 7th, 2019
Articles Posted: 102
More by this author