How to Correctly Install the Ceramic Ball Mills?Posted by Sophie on August 18th, 2019 Ceramic Ball mill installation is a complex project involving different sizes, technical requirements, installation procedures and installation methods. Once an error occurs, it will not only affect the normal production of the equipment but also cause casualties. Therefore, the installation method of the ball mill must be highly valued. Before the ball mill installation process, some pre-installation preparation is required to ensure the quality of the installation. 1. Prepare the installation plan Ball mill installation requirements are very high, so it is very important to develop detailed installation plans and procedures before installation. For the entire installation process, the installer should specify the installation time, coordinate the various operations, and ensure that each process goes smoothly. 2. the basic check The basic calibration mainly includes the basic surface condition, external dimension detection, elevation, horizontal and vertical centerlines, distance and verticality of the buried bolts. 3. Embed the center plate and reference point The basic point of installation is the center tag plus the reference point, as the above two points need to be carefully buried. 4. clean the ball mill shield In order to protect the newly produced ball mill body and accessories, it is usually coated with anti-rust oil after production, and it should be cleaned before installation. Apply dry oil to the surface to ensure lubrication. Levels, magnetic bases, steel tools, etc. need to be prepared during the installation process. Purchase ball mills: China Fote Like it? Share it! More by this author |