How To Repair A Cracked Skylight Window?

Posted by Rick Lopez on August 21st, 2019

Generally, a skylight window adds a great dimension to any specific room where it is installed. Plenty of natural light is specifically allowed in for a much brighter room and so, less energy is used with the help of skylight window.

This requires services related to the Skylight repair in Brooklyn. When a crack is seen in the window, it can preferably not only cause the water to leak through. Along with that, it can also cut down on energy efficiency. Here is given a brief discussion regarding some of the simple steps which are needed to repair the cracked skylight window.

Step 1: Clean Skylight Window

It is very important to make sure that it is clean before doing any work to the crack in the skylight window. Along with that, you can also use some window cleaner and after that, spray it on the glass. You can also use a soft cloth for cleaning the window by using a clockwise wiping motion.

Step 2: Apply Epoxy Sealant

For the skylight window, a vehicle glass repair kit is considered to be perfect. With a tinted glaze on the top, both are usually made of impact-resistant material. All that is needed is to mix the epoxy sealer in the kit in the right consistency. Finally, it is needed to be applied to the crack with the help of a supplied applicator.

Step 3: Spread Smooth

Step 4: Let Dry And Check

Conclusion

In this way, it is particularly evident from the above section that one also should consider services related to the roof leaking repair in Brooklyn.

Author Resource:-

Rick advises people about home services, roofing installation and affordable roofing & waterproofing contractors. You can find his thoughts at roof repair news blog. Visit this website for more information on residential roofing service in Brooklyn.