An Outdoor Lighting Tutorial how To Install Landscape Lighting!

Posted by Rita H Peterson on August 22nd, 2019

A good lighting can satisfy your needs along with form and function altogether. Whether it is a general lighting installation in Port st. lucie or a proper lighting to create     the perfect atmosphere, the right fixture can shed a whole new light at any place of the area. Although installing landscape lighting is not an easy task, as it requires working well with electricity which can be extremely hazardous. A pro knows how to install fixtures correctly, and quickly using proper local codes. Choosing a qualified electrician on the job, you’ll be enjoying your new light fixture in no time.

Have you ever thought of viewing a brilliant landscape lighting that helps your yard transit smoothly from a sunny day paradise to a subtly warm paradise welcoming with nighttime oasis! If you wish to have lighting installation in Port st. lucie, here is a proper tutorial and steps for you to follow!

Let The Knowledge Be Your Guide Light: Let’s Begin!

It is very important to choose an ideal path with considering some key factors such as proper items and tools, as the process carries various steps. You must take into consideration with solar lights that turns on automatically, However, the light voltage lighting requires professional installation of a low voltage lighting tapping into the home’s 120-volt current, transforms it into a 12-volt current and uses it to illuminate the yard.

Choose Your Ground: Special Features!

The primary step for a DIY is to have stunning lighting scheme. Outdoor fixtures come with a variety of special features which clearly adds value, save money and make lighting more convenient. They must be energy-efficient lighting to meet the  strict standards. It is important to select where you want to install, now plan around obstacles such as trees, bushes, rocks and irrigation lines in order to clean the area for installation.

Can You Dig It? 

This is an important step which you need to follow, by digging it and clearing away the leaves giving yourself an easy-to-navigate area. With a clear lawn you can turn the lights wherever you want them to. Detach sod in particularly one piece, measuring it to be at least 12 inches wide. Fold the detached sod over onto itself, leaving half of the soil exposed. You must use the square-bladed shovel for a narrow and shallow trench along the path you laid out for your wiring.

Install All The Wirings: Hopping On To The Technical Part!

Narrow stick of 1/2-inch plywood or rounded tool handle.
Must use of a transformer.
Voltage meter.
Large/ big screwdriver.
Optimal wire fixtures that vary between different types. 

Steps:

  • Now, turn off all the lights of the transformer, for the safety measure.
  • Find the GFCI-protected outdoor electrical outlet  where the transformer will go.
  • Take the low voltage wiring and strip the insulation off of the end. Remove between 1/2-inch and 3/4-inch of insulation.
  • Unwind the wires as you tend to lay them along its trench.
  • Now, cut a small opening in the sod where each fixture will be installed.
  • Pull a few inches up, this may also lead to pulling sod closer to the dirt.
  • Press the lighting fixture into the prepared hole, and work efficiently before they stake.
  • Turn the power on at the breaker box and then at the transformer box. Do not forget to use a voltage meter to verify that each fixture is between 10.5 and 12 volts.
  • When the fixtures work properly, turn them at nighttime.
  • You can also use the stick of plywood or a tool handle to push the wiring firmly in the trench.
    Replace the sod, laying it evenly over the dirt.
  • For the finishing touches, must secure the light fixtures by pushing them all the way down.Their bottom edge should be flush with the ground in order to hide the cable.
  • Once you are fully done, add some grass seed to help each fixture fit seamlessly in your landscape.

Like it? Share it!


Rita H Peterson

About the Author

Rita H Peterson
Joined: May 16th, 2018
Articles Posted: 94

More by this author