Fluid bed drying is the optimal way for controlled, soft and even draining of we

Posted by Kartik dhawan on August 29th, 2019

Fluid bed drying is the optimal way for controlled, soft and even draining of wet solids. The intense heat/mass transfer of the fluidized bed stock makes this technique especially helpful and time-saving. The technology is also developing post-drying of spray granulated or extruded goods with slight residual rain.

Fluid Bed Dryer manufacturer uses the intact particles processing industry. In the pharmaceutical enterprise, this innovative method has followed the time-consuming tray drying long ago. Also, fluidized bed drying gives regulated, and uniform drying requirements related to the additional drying in dishes.

Correctly used, fluid bed dryer manufacturer in India presents a sufficient answer for the gentle and even drying of your goods.

A Fluid Bed Dryer is intended for fast and stable drying of powders, crystals and average-sized pills. The Fluid Bed Dryer finds purpose in Pharmaceuticals, Bulk Drugs, Dyes & Chemicals, Phyto-Chemicals, Catalysts, Food Products & Starch derivatives, Pesticides etc.

Cold air is drawn in adopting a fan. The atmosphere is then passed through a filter and burned to provide warm air by application of electric heaters. If the output includes water or hazardous substance, the dryer must be operated using steam and outfitted with a flame-proof motor.

The heated air moves in the output container, which has diffuser services and a sieve. Due to the current of air, the wet product gets fluidized. The material gets enclosed by the hot air and gets dried due to heat transfer. Moist air moves through a filter pack and an exhaust pipe. The Fluid Bed Dryer is not fit for drying of fluids or pastes.

Fluid Dryer Manufacturer in India manufactures supply and export Fluid Bed Dryer Machine. Produced in permission with global quality standards, these products are made using quality parts and substance, obtained from the authentic merchants of the market. They also carry regular studies to devise our Fluid Bed Dryer Motor.

Features:

• Sturdy frame

• Low pay

• Smooth power and low power loss

Additional Features:

• Trolley system equipped with the device is SS-316 assembled

• Sponsored by industrialization and PLC controller

• Outfitted with an extension chamber that features the guide rod

• Lifting device, which is housed in a channel lower chamber, is made of Stainless Steel

Working Principle:

• The dryer absorbs the mysterious air via micron filter and steady fan hack

• Store clean air moves over electric heaters/ steam

• Using fluidization, the hot air moves in the product

• The dryer is equipped with dehumidifier maintenance

• The blower rate is managed through an AC frequency drive that helps in maintaining fluidization and withdraws the choking of the filter bag

• To check order part in a case and achieve stable fluidization, the ranking order is provided

Advantages:

In a Fluid Bed Dryer, the heat is classified evenly during the result, and the heart rate is very eminent. High production rates are obtained because of the reduced drying period. As the product is in close association with the drying air at a low temperature and for a short term, the physical and chemical components of the product are not affected frequently, and henceforth the dryer can be efficiently used in the case of heat-sensitive results. As a result, it is continuously working during the drying process; there is minimal lump configuration or case setting.