Using an Engraving Machine? Know the Preventive Measures when Using a Metal Etch

Posted by jimaniinc on September 3rd, 2019

Although this engraving system is very small compared to others, when it comes to industrial performance, it definitely stands up to the rest! 

Some of you may be looking for an essential laser etcher that offers excellent checking results in the event you take on specific work. In such cases, deciding on this particular machine will be ideal for you. It will meet your need for marking smaller quantities, with precision! This Metal Engraving Machinewill help you engrave all kinds of metals such as jewelry, lock implants and surgical equipment. Some features you need to look out for when purchasing these are red beam focus, red beam preview, z-motion, etc. 

Maintenance should also be considered when buying a machine such as this. The slightest damage can be very expensive! Most lasers come with maintenance manuals. You need to make sure that you read (and reread) it as often as possible to not miss any important instructions the manufacturers might have given for that particular laser. Apart from that, there are some basic steps that you need to follow if you are aiming for a long productive life of your machine. You may want to consider cleaning optics for cleaning the fumes, the auto-center component, etc. 

The upkeep of smaller laser etching machines for metal is straight forward and fundamentally the same as that of other electrical instruments or hardware. Most of the machine falls under preventive support. If you have previously purchased the Metal Etching Machines, you are probably familiar with the normal support methods as well. Even though these machines may require regular care and upkeep, you must be very careful not to damage the machine. This could lead to unexpected costs. 

One of the most important things you should keep in mind is that lasers made from different manufacturers are different in nature. Therefore, no matter how common the maintenance may be, there always seems to be something extra that your manufacturer will require you to do as far as the caring/maintenance of your laser. 

One of the most fundamental things to do to promote safety include keeping the area surrounding the laser free from clutter. The machine should always be placed away from explosives or any other combustible material such as gasoline, acetone, and alcohol. 

To clean the vapor or smoke collected on the X-pillar or other areas in the laser, you may utilize cotton swabs. The gentle, delicate fabric of the swabs are safe to use on the delicate areas of your machine.