PCB maintenance methodPosted by summer on September 3rd, 2019 Now PCB boards bring benefits to many electrical devices, solve many problems that traditional circuit boards cannot solve, and become an electrical component that everyone likes because it plays a central role in electronic devices, so it is used in daily use. In order to improve the maintenance of it, to avoid damage to the electronic equipment caused by the failure of the use, let LHD PCB introduce the method of curing the PCB board: (3) Regularly check the capacity of the electrolytic capacitor in the PCB board. If it is found that the capacity of the electrolytic capacitor is lower than the standard range of the nominal capacity, it should be replaced in time. Usually, the life of the electrolytic capacitor should be operated for about ten years. Replace all in order to ensure the operation of the board. (4) For high-power equipment coated with heat-dissipating silicone grease, check whether the heat-dissipating silicone grease is dry and solid. If it is dry, remove the dry heat-dissipating grease and apply new heat-dissipating grease. To avoid high-power equipment in the PCB board circuit board burned out due to poor heat dissipation. Improve the awareness of the maintenance of the PCB board, so that the circuit can reduce the probability of failure under long-term working conditions. When purchasing the PCB board, you can first learn more about the good brands of the brand on the Internet, and then go to the quality. A good PCB factory consultation is purchased to ensure the quality of the purchased line equipment. Like it? Share it!More by this author |