How CCTV Inspection & 3D Scanning Help Maintain Pipeline Integrity

Maintaining the integrity of different infrastructures is critical in ensuring that the needs of the public are met. These include pipelines. If a gas or water pipeline is in a state of deterioration, it hampers its intended operation. Worse, it can put people’s lives at risk. That’s why regular checking of pipeline condition is very important and this can be done through CCTV pipeline inspection & 3D scanning services. Sydney & Melbourne service locators use these two methods to accurately gather & provide the essential data needed.

 

Closed Circuit Television (CCTV) inspection is a method used to visually probe the interiors of pipelines, storm drains & plumbing systems. It is one of the most efficient methods used to diagnose the condition of pipes. Moreover, it is also a very effective way of mapping out drainage & sanitary systems.

 

In this inspection, a service locator positions a camera inside a pipeline. Once inside, it can capture & produce detailed imagery and video. The camera used can either be one of the following:

The inspection can detect different issues including the following:

3D  scanning is the process of analysing real-world objects or environments using a special device to collect data. The data gathered can be used to create digital 3D models.

 

When used in pipe inspection, it speeds up the process as locators do not need to set up bulky equipment and locate entry points as they may need to do for a traditional CCTV pipe inspection. Melbourne or Sydney locators use handy equipment like Handyscan to conduct 3D scanning for pipeline assessments. By hovering it over a pipe, it scans & gathers needed data accurately.

However, as with any other technology, this method may not be the best one to use depending on the needs & limitations of a project. Hence, utilising it along with traditional CCTV pipe inspection is recommended to produce precise results. And these results then become the basis of different reports from dilapidation to general pipe condition.

 

Other than pipeline inspection, there are still other uses for 3D scanning services. Sydney or Melbourne locators also utilise it in underground utility mapping (among others) to create a much better visualisation of the data gathered. It also allows evaluation to be done in every angle with the 3D model it generates.

 

With all things said, maintaining pipeline integrity is only made possible through 3D scanning services sydney & CCTV pipe inspection. Melbourne & Sydney service locators use these to gather & provide critical data needed in rehabilitation projects. On this, locators who use high-quality equipment and have extensive experience in CCTV pipe inspection & 3D scanning services, Sydney or Melbourne-based, should be hired to ensure precise results.