Tips for reducing the wear and tear of the machine

Posted by kuangshanposui on September 26th, 2019

The seesaw is one of the important parts of the smashing machine. When the Jaw Crusher Price is in operation, the movable jaw is the reciprocating motion of the fixed jaw. When the feed enters the jaw crusher. It is also two jaws that crush and split the material to break it. It can be seen that the importance of the seesaw to the smashing machine. Today, we introduces several small ways to reduce the wear and tear of the smashing machine and hopes to help the customer.

1. When purchasing a jaw crusher or replacing the seesaw later, it is recommended that you choose a plate made of a material with good wear resistance, high hardness and toughness, such as our company's jaw crushing. The machine plate is made of high alloy alloy and has high wear resistance and is well received by customers. 2. When installing the jaw crusher, the jaws are identical to all other components and must be securely fastened. 3. The feed size of the jaw crusher should be controlled within 85% of the large size of the feed port. Excessive material can directly cause wear and even damage to the seesaw. 4. Before entering the jaw crusher, check whether the material contains high hardness and is not suitable for crushing jaw crushers, such as metal. If it is, then measures should be taken to remove the hard object. In order to achieve the above suggestions, although the wear of the jaw crusher jaws cannot be completely avoided, the wear of the jaws is greatly reduced, and the service life of the jaw crusher is prolonged.

Like it? Share it!


kuangshanposui

About the Author

kuangshanposui
Joined: May 16th, 2018
Articles Posted: 149

More by this author