Good lubrication has a great relationship to bearing life

Posted by wearresistant on October 10th, 2019

Maintenance of the machine is an extremely important and repetitive task. It should be closely coordinated with extreme operations and overhaul. There should be a full-time staff on duty.

Wear resistant castings machines are relatively worn and require more maintenance and care:

1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, the required oil must be cleaned and the seal must be good. Main oil filling: (1) Rotating bearing (2) Roller bearing (3) All gears (4) Active bearing, sliding plane.

2. The newly installed tires are prone to loosening and must be inspected frequently.

3. Pay attention to whether the work of all parts of the machine is normal.

4, pay attention to check the wear level of wearable parts, always pay attention to replace the worn parts.

5. The plane of the undercarriage of the movable device should be out of dust and other materials to prevent the movable bearing from moving on the chassis when the machine encounters unbreakable materials, resulting in serious accidents.

6, the bearing oil temperature rises, should stop immediately to check the reasons to eliminate.

7. If there is impact sound when the rotating gear is running, it should be stopped and checked immediately and eliminated.

If you want to know more, you can click here: https://www.wearresistantcasting.com/

Link To Directory
Top Searches - Trending Searches - New Articles - Top Articles - Trending Articles - Featured Articles - Top Members

Copyright 2019 Uberant.com
652,985 total articles and counting.