Brake And Lamp Certification For All Make And Model Of Vehicle

Posted by Smog-Latino on October 22nd, 2019

If your vehicle has a salvage title or has been non-operational for several years, you may need a complete brake and light inspection and brake and lamp certification to ensure that the basic safety systems components are working well enough to get it safely back on the road.

If you need a brake and lamp inspection in Fontana, CA, our local and customer-focused Smog-Latino auto repair shop is the best place to come.

We complete the required comprehensive inspection of these two important systems to certify your vehicle. Once your vehicle has successfully passed the inspection, you present the brake and lamp certification to the California Department of Motor Vehicles (DMV).

Smog-Latino Auto Care is here to help you with simple testing and affordable repairs to any make and model of vehicle. We are located in Fontana, CA.

Specifications Considered During Brake Inspection

1. Brake Pads, Shoes and Brake Drums should be within manufacturer specifications.

2. Brake Rotors and Brake Drums must be within manufacturers' specifications.

3. All braking hardware should not be missing and in a good working condition, Emergency Foot or hand brake should be working according to manufacturer specification.

4. There should not be any signs of leakage in the hydraulic system, this includes a master cylinder, ABS Module and pump, wheel cylinders, calipers, valves and hoses and no cracks in hoses.

5. The vehicle must be able to stop in less than 20 feet at a speed of 25mph. Specifications Considered During Light Inspection:

Specifications Considered During Light Inspection:

1. All originally lighting components must be in working order.

2. Headlamps should work properly at manufacture specifications. Tail lamps, marker lamps, back-up lamps, brake lamps, license plate lamps, turn signals, high beam indicator & any and all warning lamps.

3. Headlamps must be amiable and all the adjusting hardware must be in good working order.

4. Lenses and reflectors should be intact.