Looking for the best Electrostatic Filter—ESPO is herePosted by SovPlym India Pvt. Ltd. on October 24th, 2019 Industrial Electrostatic filters are nowadays gaining popularity and they are gradually substituting the traditional filters. These filters use static electricity to filter and precipitate oil, smoke along with certain other particles. Industrial electrostatic filters work on the basis of electrostatic precipitation principle. It is also known as large industrial emission control unit. They are even competent to filter dust particles from the flow of gas. They basically precipitate the particles of gases by ionizing the, using a high voltage discharge electrode. The dust particles that are ionized to negative charge are attracted to the positively charged collector plates. Thus getting eliminated from the main flow of gas. Originally, Industrial electrostatic filters were designed to collect valuable industrial process materials or by-products from the precipitate. But, recently they are also used in air pollution control as they remove dust particles and smoke from the flow of waste gas generate in power-generating stations and some heavy industrial factories. What is ESPO? As an Industrial Electrostatic filter ESPO is a perfect fit. It has the potential of capturing oil, smoke, and particles, those are below 0.05 microns. They are the best solution for cleaning the airflow by eliminating small oil particles from it. They use a heavy-duty electrostatic cell with longevity and with minimal maintenance. This filter offers a consistent service for several months without paying much cost for maintenance, as do not need replacement of filter regularly. They do not need normal filter replacement. It decreases their maintenance and repairing charges as well. ESPO is designed to work at its best for 1-2 work shifts. This ESPO needs emulsions with 5% oil content. These filter needs oil lubrication to avoid a high amount of dust retention. This industrial filter is also suitable for thick oil with high kinetic viscosity. ESPO is perfect for oil smoke filtration, where the initial pollutant concentration is up to 40mg/m3. Features of ESPO:
Why ESPO? They work exceptionally well when it comes to filtering smoke and oil. ESPO has filter efficiency over 92% and it arrests 80% of the oil particles in liquid form using its mechanical filters. It has a special feature of liquid fraction separator. It has a 5 step cleaning principle, where the first 3 stages involve mechanical filtration and the last two stages use electrostatic filtration. This actually eliminates the need to clean the filters or replace them. ESPOs is best when it comes to filtration of smoke particles and oil. There are recommended by most consumers. It’s high time you need to select the best. So, what are you waiting for? Go get your ESPO soon. Hurry up! Like it? Share it!More by this author |