Daily maintenance of Raymond Mill

Posted by birder2525 on October 26th, 2019

First, production maintenance, which mainly refers to problems affecting production planning, there are two possible factors causing failure: one is the performance problem of the device itself, and the other is the problem of operator. Generally, there is no quality problem when testing the machine, so the quality of equipment in the later stage of production is much less influential, which may be caused by the operator. For example, the poor sealing of the powder lock device will result in low or even no powder output and low output. The uneven feeding will affect the evenness of the finished products and cause problems such as blockage.

Second, fault maintenance, which refers to the unplanned maintenance of Raymond mill in case of failure or performance degradation. It is a kind of behavior of troubleshooting according to specific fault phenomenon, such as the problem of no powder coming out of the powder collector and abnormal dust at the feed inlet, etc. Such common failures are described in the detailed technical description of equipment. In addition, the fault problem cannot be handled at will. The technician should be consulted or the technician should be informed of the troubleshooting. In addition, the whole process of troubleshooting should be carried out under the condition of power failure to avoid other accidents.