An Expert’s Guide To Hot Tub Maintenance

Posted by Jack Fernandis on October 28th, 2019

Walking into your hot tub after a long and tiring day is relaxing and peaceful. Buying a hot tub is a big investment and people are often worried about its maintenance. Be it the filters, cover or the tub itself, there are too many elements to maintain in a hot tub, right? Experts believe that maintaining a hot tub is an easy task that ensures its proper functioning in the long run.

This article summarizes 4 maintenance steps as mentioned by industry experts. Follow these steps to ensure proper maintenance of your hot tub.

Understanding The Hot Tub Chemistry

Understanding the chemistry of your hot tub is one of the core maintenance steps you should focus on. Check the pH and alkalinity levels of water and other cosmetic products you put in your hot tub. Aim to maintain a pH level of 7.4 to 7.6 in your hot tub. If the pH value is below .4, the solution is acidic and might corrode the material of your hot tub. You should also keep the alkalinity of the solution in your hot tube in check. Use alkalinity test stripes to maintain the alkalinity level in the range of 80-120 ppm. Any deviation from this alkalinity range would also affect the overall pH value of the entire solution.

These steps become significant in the long term functioning of your hot tub. Besides this, use high-quality sanitizer to restore the pH and alkalinity levels before using your hot tub after a long period.

The Filters

The filter collects dirt and debris from your hot tub and keeps it clean. Beachcomber hot tub dealer Markham advises to unclog and clean the filters once every two weeks. Doing this will not only keep the water in your hot tub clean but also will help you avoid any replacement or maintenance charges.

Remove cartridges, cap, and plate from the filter and use a high-pressure hose to get rid of any dirt or foreign materials the surface. You can also use high-rated cleaning agents for deep cleaning of the filter. Make sure that the filter is dry before putting it back in your hot tub.

Cleaning The Tub

Due to the consistent use of cosmetic products such as oils and lotions, the surface of your hot tub gets dirty. As such, occasional cleaning and wiping of the surface keeps your hot tube clean. Make sure the water is drained and the surface is dry before starting this process.

Use a mild dish soap and a damp cloth or sponge to clean your hot tub. It is advised not to use any abrasive cleaning agent for the same. Make sure to sanitize your hot tub post-cleaning to maintain the optimal pH and alkalinity levels.

To Sum It Up

Follow these simple steps to maintain your hot tub. There are hot tubs that come with ozone generator or Ozonator to keep them clean. As such, your choice of hot tub is crucial in its proper maintenance too. Make sure to check for the reputation and customer ratings of a hot tub dealer before buying.