The Right Way to Clean an Area Rug

Posted by JP Carpet and Floor Care on November 12th, 2019

An important part of any living area is, of course, the carpeting and rugs. They add a unique element to the room and make it look stylish. Though, they can only fulfill this purpose if they look clean and shiny. You might think the cleaning is too complicated a process. But it’s actually quite easy. Here are some tips that will help you. 

Always Read Instructions

Every rug is highly expensive so you must make a priority to read the instructions. Some rugs can only be cleaned via specific methods. You need to know these methods beforehand because otherwise, you may damage the rug. This is going to cost you a lot. 

Simple Cleaning Method

If you have not hired a company to provide Area Rug Cleaning Burbank, then you can use a simple yet effective method to clean the rug. You would require a baking soda plus a vacuum that is of the two-speed time. It’s good if the vacuum cleaner has an upholstery attachment. Do this method only once or twice a week, unless the rug has gotten too dirty. 

What you need to do is take all the smaller rugs outside. Shake them all up properly to remove the dirt. Then you should configure the settings of your vacuum cleaner to ensure it has a reduced speed of airflow. This is going to ensure that the vacuum doesn’t stick to the rug. Sprinkle all the baking soda on the rug and then switch on the vacuum. The baking soda helps to remove odors. After cleaning the upper side, roll up each side of it so that the edges can be cleaned as well. You should use the vacuum to remove any dust particles you see on the rug. 

Deep Cleaning Method

This is mandatory to do at least once a year. Sometimes the rug needs to be cleaning using a more special method. Different materials require different methods. 

Woolen and Cotton Material

The woolen and cotton rugs definitely make for quite a sophisticated style but they are especially difficult to clean. The dirt gets lodged inside them and it is incredibly hard to remove it. Though, nothing is impossible!

Method: Take the woolen rug outdoors and give it a good shake. Then vacuum it to clean out the dirt. Then make a solution of mild laundry detergent in a bucket of some cold water. Take a microfiber cloth and soak it in the soapy water solution. Make sure the water isn’t in the cloth too much because too much water can ruin a rug. Then use the cloth and gently dab on the necessary parts of the rug. Refill the bucket and change the cloth when needed. After you do this, you have to assure that the rug completely dries. 

Jute Material

These are much lightweight and provide an earthy vibe to the area it is in. Though, the hardest thing to deal with when it comes to jute rugs is that any form of moisture can easily damage them. That is why you cannot use water to clean it. 

There is a special dry-cleaning kit specially made for jute rugs. It can be expensive but explore all the shops to find an affordable one. Follow the instructions on the kit and the rug will be good as new. After using the kit, you need to vacuum up any powder or debris that is left. 

Here are the main tips you need to know when it comes to properly clean your rug! Follow these tips to ensure your rugs last a long time.