How to select LCD separator machine?

Posted by MichealH Alexander on November 12th, 2019

LCD Separate is the important step in the whole process, so select a good suitable machine is a concerned question.

There are freezer separator and traditional wiring separator machine for your option.

1. Freezer Separator

If you choose the freezer separator machine, the backlight may lose and you may need to replace the backlight too, but if you leave the screen for few minutes after separating and don't bend or move it, it may save the back-light.

But if you do Samsung S6 S7 edge screen, you must use this freezer separate machine.

  1.   Traditional Wiring Separator

There are semi automatic separating machine and manually type separating machine on the market.

2.1 Semi-automatic separating machine

The semi automatic just help you to move the separating wire by motor.

It can control the separating wire moving by a fixed constant speed. Fume Extractor Soldering

 2.2 Manually type separating machine

The flat plate type is old and traditional one, the slope plate type is newest design, the advantages of the newest version slant slope plate separator as below:

1. It use mini size but more stronger suction built-in new generation vacuum pump

2. It's separating speed is more faster, it just takes 30-60s to finish one screen, the old machine may takes 90-120s.

3. You will use less muscular strength of your hand to finish separating work by this new slant slope plate separator

4. New slope design to reduce the screen damage rate in the separation process

5. It is more easy control the separating wire during separation process

If you also do Samsung models phone, you should better to choose below manually type separate machine, because it also support to separate the Samsung frame.

The result for using semi-automatic or manually type separate machine is same, just depends on which way you like.

But people may care about the wire will damage the polarizer, if you keep the wire down and enough touch the glass during whole process, that's fine, after you do more practice, you will get the skill and do perfect separating without polarizer damage. Cell Phone Parts Wholesale

Some people may asked if it is good to use 5in1 machine in LCD refurbish work. My opinion is if you want to get very good result and do more screens a day, I suggest you getting the separately function machine, the multiple functions on one machine is not good, its work efficiency is low.

Like it? Share it!


MichealH Alexander

About the Author

MichealH Alexander
Joined: September 11th, 2019
Articles Posted: 1,627

More by this author