The pressure is relatively high and the price of PVC

Posted by bottlesjars on November 14th, 2019

From the marketing model of the five general plastics, the direct sales rate of PE and PP is relatively high, both above 40%, while the direct sales rate of ABS and PVC is relatively low, and the self-sufficiency rate is not higher than 30%, mainly for various plastic products. 2015 The capacity expansion rate of PVC is slowing down, and the capacity of PP is expanding rapidly. Only by controlling the speed of capacity expansion, the price of the product can be relatively strong.

Mainly South Korea, Japan and other high-end quality, domestic supply gap products. Otherwise, the excess muddy will sink deeper and deeper, and the market will not perform better. ABS and PS capacity expansion rate is relatively slow, ABS and PS capacity ratio is 6%. It is more dependent on some imported products, mainly divided into price dependence and product type dependence. The price difference between East China and China is 1800 yuan/ton. ABS self-sufficiency The rate increased by 10% to 62%, the PS self-sufficiency rate increased by 7% to 73%, and the PE self-sufficiency rate increased by 1% to 58%.

The high self-sufficiency rate of PVC and PP was mainly attributed to the large production capacity PET Bottle Blowing Machines Factory of PVC and PP. If the PP capacity expansion rate is not controlled in time, the PVC is now PP. The price of ABS is higher than 10,000 yuan/ton; while the PVC production capacity is the largest, the domestic supply side is The pressure is relatively high, and the price of PVC is less than 6,000 yuan / ton. In 2011, PVC production capacity accounted for 45% of the five general-purpose plastics, followed by PE production capacity of 22%, PP production capacity slightly less than PE, ABS and PS production capacity accounted for 6% and 5% respectively. Compared with PP, the capacity expansion rate of PE is relatively low, and the difference between PE and PP is large. The price dependence is mainly low-end products with price advantage in the Middle East.

China's economic growth has entered the shift period, the speed has slowed down, domestic demand for bulk commodities has been affected, and the growth rate of domestic bulk commodities should be adjusted simultaneously. The proportion of PVC capacity is reduced to 36%, the capacity of PP is 28%, and the capacity of PE is increased to 24%. PE self-sufficiency rate is less than PVC and PP, mainly due to the limitation of domestic supply structure. 

Like it? Share it!


bottlesjars

About the Author

bottlesjars
Joined: October 24th, 2019
Articles Posted: 5

More by this author