California Yellowtail Half Mounts

Posted by MichealH Alexander on November 14th, 2019

California Yellowtail are a commonly targeted fish species off the coast of California. These hard fighting fish are related to the east coast Amberjack and are a delicious table fare both cooked and as sashimi. Our California Yellowtail Half Mounts are produced with care to showcase their vibrant coloring and almost electric looking eye and are anatomically correct half fish replicas that are intended to be displayed on the wall. A Half Sided Fish Mounts is produced by casting the front part of our two sided wall mount molds. When displayed the circumference of the half mount is either touching the wall or very close to the wall. This process cuts labor and supplies cost and therefore results in a lower price point however the skin texture and finishing process is the same as a traditional Full Mount Fish Replicas.

California Yellowtail Half Mount Paint Schedule

California Fish Mount GuaranteeWe do not custom paint our half mounts but regular paint schedule is to paint the California yellowtail "lit up" and alive which is most likely what you are looking for and what most customers really appreciate. California Yellowtail can look different depending on which area of waters they are taken from however normally they have a tealish green back with a yellow band that runs across their side. The final step is to clear coat the sailfish with a UV Protective Urethane clear coat. These beautiful California yellowtail are perfect pieces of decoration for your new house, office or Florida room.

Shipping Your New California Yellowtail Mount

Our packaging team is experienced and completely understand the importance of superior packaging to ensure a damage free transit. In the event that the shipping carrier decides to run over your package with their truck or something catastrophic happens we will instantly replace the damaged mount and please keep in mind all of our fish mounts come with a money back guarantee.

Installation Of Your California Yellowtail Mount

Your new California Yellowtail half mount will arrive with a resin hanger attached to the backside of the half mount that runs parallel to the ground. Hold the half mount up on the wall, mark the spot where the hanger touches the wall, drill in a couple screw or hammer in a couple nails and then hang your new California yellowtail half mount. If you are intending to put this outside permanently we do have some additional hardware options. Please contact us prior to ordering to discuss those costs.

Like it? Share it!

MichealH Alexander

About the Author

MichealH Alexander
Joined: September 11th, 2019
Articles Posted: 1,627

More by this author