How to clean your stretch wrapping machine?

Posted by uuuseff on November 17th, 2019

First, listen to your stretch wrapping machine when it runs. If you hear any squeaking or grinding, find out why and fix it.

Inspect any belts-usually those that drive film delivery system up and down and under the Turntable-to make sure they`re not fraying. If you need a replacement belt, call up the manufacturer`s parts department and get a new one shipped (good manufacturers will ship parts by the next day).

Performing periodic maintenance check on your stretch wrapper is important. But so is checking to make sure your stretch wrapper is set up to wrap effectively.

Knowing if your load is safe to ship isn`t complicated. It`s all focused around containment force, which is the cumulative squeezing force the film puts on the load. Containment force is the best defense against shipping damage.

It`s important to know how much containment force your load needs and to make sure to ship with at least that amount. If you are unsure of how much containment force is necessary for your loads, you can download our recommendation chart here.

By checking your machine every year you can reduce the likelihood of any disastrous maintenance issues that might arise unexpectedly. And by checking your wrap quality you can increase the chances of your products making it do their destination without damage.

Generally, the main parameters are determined according to the requirements of the material handling system, the conditions of the loading and unloading sites, the relevant production process and the characteristics of the materials.
① conveying capacity: Conveyor capacity refers to the amount of material transported per unit of time. In the delivery of bulk material, the hourly delivery of material mass or volume calculation; in the delivery of articles into pieces, the number of hours per hour delivery.
② conveying speed: improve the transmission speed can improve the transmission capacity. When the conveyor belt is used as a pulling member and the conveying length is large, the conveying speed is increased. However, high-speed operation of the belt conveyor should pay attention to vibration, noise and start, braking and other issues. For the chain as a tractor conveyor, conveyor speed should not be too large to prevent increased power load. At the same time the process of operation of the conveyor, conveyor speed should be determined in accordance with the production process requirements.
③ component size: conveyor component size, including conveyor belt width, strip width, hopper volume, pipe diameter and container size. The size of these components directly affect the transport capacity of the conveyor.
④ conveying length and inclination: the length of the transmission line and the size of the angle of a direct impact on the total resistance of the conveyor and the required power.

Conveyor System

Conveyor System,Conveyor Belt Systems,Mini Conveyor System,Motorized Conveyor System

Shandong Sinolion Machinery Corp., Ltd. , https://www.sinolion.cc