Case Studies in Capsule Filling
Posted by rainbow cheng on November 19th, 2019
Aipak, as one of the leading suppliers of empty capsules for the pharmaceutical industry has an in-depth knowledge of their customer base with a wide variety of capsule filling equipment and an extensive range of filling ingredients. Understanding the influence that each one has can help prevent problems during development and lead to improved efficiency and greater productivity.
Aipak technical service team continually requests for feedback from customers on equipment purchase for fill products, process flow evaluation and personnel training to complete the productivity loop. With this insight, the company is able to determine cost savings with recommended improvements using “Savings Reports” that are based on total cost-in-use.
Now let’s talk about some cases it has summarized as below:
1.A New Look on Capsule Filling – Speed vs. Yields
The old phrase “Time is money” continues to apply in today’s demanding businesses. To deliver a finished product a company has to pay for labour and utilities, the cost of which can fluctuate depending on the volume produced – along with other fixed costs such as rent and insurance. When more products are produced, manufacturing cost is less using the same equipment and people as before. Note that time to manufacture can be broken into two controllable variables – uptime and equipment throughput.
In the business of capsule filling, it is the filling of capsules that accounts for most of the cost of the encapsulated product rather than the cost of the empty capsules. For this reason, despite the correlation between machine speed and cost, increasing production yield has been the main objective of capsule-filling operations. Savings generated from improved yield are the result of reduced losses of staring materials as well as the time and energy conserved in producing fewer filled capsules that cannot be sold. Consequently, even a small improvement in yield production can have a financially significant impact.
Company A was experiencing poorly joined capsules on their intermittent motion capsule-filling machine for one of its products. Internal inspections of the problem caused loss of production time and consistently low yield. Upon review by the Aipak Technical Service Engineer, the setup of the closing station was targeted for improvement. The height of the counter bearing and timing of the movement was adjusted to correct the conditions causing poor joining of capsules. The adjustment resolved the issue. As a result, production downtime due to internal inspection was eliminated, yield was improved by more than 8%, and the company saved ,000 annually for production of this one product.
2.Increasing Speed to Increase Profit
In a study conducted by Aipak, a not-so-obvious conclusion was discovered: the total cost/savings return associated with increased machine speed is higher than that for yield increase. Thirty customers involved in capsule-filling were tracked and, with the assistance of Aipak Engineers, charted the cost savings of capsule filling productivity or efficiency based on costs associated with machine speed, yield, and downtime. The average productivity savings of ,560 per company announced to a total combined aggregate savings of about .747 million.
The combined savings exceeded the total annual cost of empty capsules.
The savings support the conclusion that improving the capsule filling efficiency is well worth the effort. In particular, increases in machine speed accounted for 61% of total financial impact. At the individual customer level, machine speed increases averaged approximately 14,000 capsules per hour.
The absence of faster throughput is often the by-product of other manufacturing circumstances as illustrated in the case study below.
Company B invited Aipak to assess its capsule-filling operation. The technical service engineer noted that the company was running below the rated speed of their capsule-filling machine. The limiting factor was the non-separation of capsules at higher speeds. Upon investigation, the engineer discovered that the vacuum pump was inadequately sized for separation of the capsules at the higher speed. Once corrected, the speed was increased by 83% resulting in a financial impact of 5,000 annually.
Such cases raise the question of why there is such a large difference in realized savings when speed improves, when compared to yield improvements. The fact is that attention is at last being given to capsule filling machine speed, and companies are now understand better how to improve machine speed. Yield losses and their financial impact have routinely been a focus of manufacturing teams. As the subject of daily production meetings, yield losses are front and center with management. Machine speed compromises have tended to be more accepted remedy for yield loss, obscuring the real financial impact of running a machine below its capacity. Today, more companies are discovering how higher throughput can have a greater impact on a company’s financials than demonstrated thus far. While greater throughput enables better use of variable labour and utility costs, it also gives a company greater manufacturing capacity within the same machinery footprint. Maximizing available capacity enables growth without additional capital expenditure on equipment.
3.Reducing Downtime Increase Profitability
Aggregate data collected by Aipak shows that reduced downtime leads to substantive savings. The numbers among 30 cases reflect only a small number of instances in which downtime was reduced by 1 to 2 hours (per 8 hour shift basis), and may not reflect the potential savings through continued technical consultation. In the following case study, the dramatic reduction in downtime was discovered through the implementation of preventative maintenance.
Company C was plagued with excessive downtime on one particular sticky product. The Aipak Technical Service Engineer listened as the company explained that due to the nature of the product, the segments had to be cleaned frequently to avoid issues with capsules fitting into the segments causing capsules not to separate. This resulted in significant delays. The Aipak Technical Service Engineer designed and implemented an ejection brush cleaning system to remove build up while the machine was running. It greatly reduced the needed frequency for cleaning, resulting in ,000 in downtime savings annually for this product.
4.Quality by Design and its Impact
Thinking and planning ahead during early setup stages can often achieve the best productivity. Quality is built into a product by delivering the optimal set of circumstances to avoid problems during the process of delivering the product to the market. The concept, known as Quality by Design, is well known in quality improvement circles and is the foundation of Six Sigma methodologies. First pioneered by Joseph M. Juran, Quality by Design asserts that quality can be planned and that encountered problems are related to how the quality was planned from the outset. Understanding dosing options and powder characteristics can prevent pitfalls. To achieve capsule-filling efficiency via Quality by Design, there are various capsule-filling technologies and dosing styles available on the market to be considered. Each style has its own benefits and limitations. Manufacturing efficiency and profitability lie at the intersection of the formulation, equipment and the capsule. Understanding the different types of dosing options, and the powder characteristics that work best with each technology helps prevent potential development pitfalls. For example, a sticky powder that is hard to compact may not work well in a tamping technology. Sometimes powder flow characteristics may not match the equipment, and it may be necessary to apply Six Sigma standards to optimize the outcome as shown in the following case study.
A manufacturer was receiving a growing number of consumer complaints about capsules that had a bitter taste. During manufacturing the capsules were joining poorly and the bitter powder was coating segments of the tamping machine, resulting in low yields. The root cause analysis showed a sticky and gritty powder that the machine was not adequately compacting for dosing. To achieve the desired fill weight, the capsules were filled beyond their capacity. The poorly formed slugs and undersized capsules resulted in powder loss into the segment which interfered with closing and left residual powder on the capsules resulting in the bitter taste. Capsugel engineers improved the compaction by adjusting the equipment to form a better slug, thereby drastically reducing powder losses. As a result, the yield improved by 10% with less downtime for cleaning, and the speed of the equipment could be increased by 25% without sacrificing weight control. For the annual volume, the savings were nearly million and patient complaints dropped dramatically
5.Measurement – Why it is Crucial for a Company’s Success
The famous Scottish physicist Lord Kelvin once said, “If you cannot measure it, you cannot improve it.” This quote not only applies to science and mathematics but also to today’s businesses. Knowing how to measure the driving force behind a business is the key to increasing profit.
Aipak can now provide a comprehensive capsule-filling efficiency “savings” report that calculates the total business impact based on specific improvements in capsule-filling machines and processes. It shows how an adjustment, a repair, or a replacement will affect speed, yield, downtime – and the bottom line. Historically, capsule-filling manufacturing metrics concentrated on machine-related end-points, such as minutes of downtime or pounds of waste at various parts of the machine. Now, by adjusting these metrics to incorporate and demonstrate the associated real-world cost impact, customers are better able to justify their remedies and plans. They are better equipped to build the business case necessary to obtain the resources and focus to drive productivity improvement in their capsule-filling operations. The following case study illustrates the point.
Company D experienced various defects after encapsulation. Aipak’s engineer quickly identified that the segments on the machine were excessively worn and needed replacement. He worked with the production team of the company and utilized Aipak’s Capsule Filling Efficiency Report to show the complete financial benefit of replacing the worn segments. The financial impact of the losses far exceeded the cost of replacing the segments. Armed with the business case, the production team justified the cost of replacing the parts with their internal stakeholders.
About the Authorrainbow cheng
Joined: November 19th, 2019
Articles Posted: 1
FREE App - Earn up to 25¢/gal cash back on gas!
Download this FREE app and earn cash-back when you buy gas, groceries and food! 100% FREE to join and FREE to earn cash back on your everyday purchases!
Quality Office Furniture USA Shipped Direct - Madison Liquidators
Nationwide vendor of quality office furnishings including Desks, Office Chairs, Conference Tables, Cubicles and more!
Earn HNT Tokens with a Helium Hotspot!
Pre-Order a Helium hotspot and earn HNT tokens that are redeemable for USD. Set it and forget it!
Lolli: Earn Free Bitcoin When You Shop Online!
Lolli is a rewards application that gives you bitcoin for shopping at your favorite online stores.
Fold - Earn free bitcoin when you shop
Earn bitcoin cashback rewards when you shop at top retailers, including Amazon, Uber, Starbucks, Chipotle, and more. Download the app, sync your payment method and start earning bitcoin today!
CryptoTab Browser - Easy way for Bitcoin Mining | CryptoTab Browser
CryptoTab Browser is the world's first web browser with built-in mining features. Familiar Chrome user interface is perfectly combined with extremely fast mining speed. Mine and browse at the same time!