5 significant water heater installation tips!!

Posted by Rooter-Man on November 19th, 2019

A water heater is a very crucial and widely used home appliance. However, to ensure its effective function, and end-user safety, it’s essential that you get it installed correctly. Though it’s important that you hire qualified electricians and plumbers for its installation, there are certain things you must keep in mind while installing a water heater in Eastern PA.

Important things to take care of while water heater installation.

1. Before calling in the professionals for installation, make sure you have sufficient space to get the water heater mounted:

Ensure there is sufficient space available for the heater unit to get installed. Keep in mind that the area should be in accordance with the size of your water heater. Also, consider the size of the water heater before installing it in your kitchen or bathroom. Sufficient space makes it easier to clean and service the heater unit.

2. Make sure you have a strong wall structure:

For a firm and correct installation of the water heater, it is also very important to prepare the wall appropriately. Make sure a wall plate is fixed firmly on the wall so the heater can be mounted on it. However, in the case of solid wall holes, they should be drilled properly so the wall plate can get fixed on it. On the other hand, special attention should be given in case of a hollow brick wall. In both cases, however, just keep in mind to fix the wall plate correctly and firmly with bolts so it can carry the weight of your water heater unit.

3. Install the water heater at a correct height from the ground:

All water heaters in Eastern PA should be installed at the proper height from the ground. A minimum height of 1.8 meters from the ground is advisable for heater installation. Also, to ensure complete safety, water heaters should be mounted away from damp and wet areas like showers, and bathtubs.

4. Before the installation, check your water pipes for blockage:

Before you start the installation, make sure you check the water pipes for any blockage. Ensure the pipes are clog-free and clean for smooth water flow.

5. Make sure the electrical connections at your home is safe:

When making electrical connections for water heaters, always ensure that the electrical supply has proper MCB protection with safe wires. It is advised that before the installation starts, call a certified electrician and get your connections checked to prevent any unforeseen problem in the future.

Always remember that installing a water heater can be a dangerous and challenging job for the untrained homeowner. And therefore, it is always a safer bet to hire professionally skilled and certified plumbers to complete the job correctly in the first attempt.