The Installation Of Small Elevators For Homes Reference

Posted by otsealex on November 20th, 2019

1, the style style confirmation
The choice of style and style is important to consider the hoistway environment and personal preferences, and secondly consider the cost and difficulty level. Generally speaking, the closed hoistway should be closed to the car, the sightseeing hoistway should be equipped with a sightseeing car, and what kind of style is suitable for the hoistway. Perhaps there are also three-sided sightseeing or partial sightseeing styles, and the most pleasant choice. the way.
2. Car layout and shape:
Generally speaking, as a saving area, most of the double-span automatic doors are used, and the side-mounted scheme is also more appropriate. Under normal circumstances, the OTSE Small Elevators For Homes adopts the industry stable hoistway standard, the width is 1200mm, and the door is 850mm wide. The width is maintained at 700mm. Most of the preferred U-shaped staircases are equipped with small elevators in the empty space, and the steel structure shaft or the aluminum alloy frame shaft of the elevator has a weak ventilation design.
3, pit and top design and installation:
Generally speaking, the pit is used as a buffer for accommodating and accommodating the car in the middle, some hops can not dig the pit, and the top point of the top is large, so the OTSE small elevators are designed in an agile manner and adapted to local conditions. Usually, the small pit is 100mm, and the bottomless pit can also be used to borrow the pit. For the bottom point, the highest point is greater than 2350mm.
4, speed design:
Generally speaking, the floor of a family home is not very low. It is also important for the elderly and those with reduced mobility. Therefore, the speed should not be so slow. 3 layers of 0.2m/s and 3 layers of more than 0.25~0.3m/s can be used. It is.
5, well location and space settings
The hoistway position space determines the elevator space and the door opening size. It is a good idea to install the elevator below the stairs and combine it with the stairs. Generally, we should pay attention to three aspects: the bottom of the stairs, the corners of the wall, and the external plugging. It is not good to block the passage in the middle. Use the opening width to reverse the width of the hoistway and use the highest point of the top layer to reverse the height of the car. The load is recommended for 3-4 people, 400KG, and the size of the car is 0.8-1.2 square meters.

How to install a small elevator in the home, the relevant knowledge is introduced here, I hope to help everyone. Through the above introduction, you can refer to it when installing a small elevator for home use.

Like it? Share it!


otsealex

About the Author

otsealex
Joined: June 13th, 2019
Articles Posted: 23

More by this author