new realistic successful dryer

Posted by yoyocrusher on November 27th, 2019

Artificial Sand Making Process Project is now additional popular in conjunction with the rising requirements of large industry. The drum dryer is one of the traditional industrial drying equipments, in accordance into the usage, they may be classified into slurry dryer, coal dryer, shape-coal drying equipment. Since the equipment is pretty big, additionally it is regarded as large-scale dryer. Industrial dryer features: dryer processing capacity is huge, a lot less fuel use, low-cost drying. The dryer has large temperature attributes, and is equipped to employ the high-temperature sizzling air to dry elements fast. Dryer is scalability, the design permits the production margin, whether or not little output that has a small improve, it isn't going to ought to be replaced. Products adopts specific designed structure, plus the tugs and rolling circle matched correctly, in order that it greatly decreases use and ability usage. It is actually anti-overload, and tube body is ready to get in easy operation with significant trustworthiness. Energy-saving steps for new dryer: (1) Completely transform the dryer tail at small temperature drying at about 1/3 of the L-shaped lifting plate. Usually, L-shaped lifting plate is vertical preset in ninety °, plus the plates around is often welded in 30 °, ninety °, 120 ° angle respectively; Thus, the spreading area enlarges by industrial dryer rotating. Consequently, the heat exchange rate is higher; Be noted that the transformation of your industrial dryer should consider comprehensively. If the ventilation is good, the exhaust gas temperature is over 100 ° C, we can add a few X-shaped center sets. On the contrary, if poor ventilation, the exhaust gas temperature is below 70 ° C, we should reduce groups with the X-shaped lifting plate center; It's very important to control exhaust gas temperature. When temperature is too large, on the one particular hand, it will cause large power intake, on the other hand it will burn the dust bag; The other way around, it will cause a bag paste, which affects ventilation, and makes manufacturing decline, severe dust internal component corrosion and large maintenance costs.