Look King Star Board Plastic Sheet

Posted by Rushell Kayna on November 28th, 2019

King starboard plastics is the leading brand in the marine industry and is the original marine grade high-density polythene sheet. For 30 years it has been in the marine industry as the well-known plastic sheet brand. It is primarily a product of proprietary process called K-Stran. For superior flatness and consistency, it is the most advanced manufacturing process. It comes with matt finish on both the sides of the sheets. It is made to environmentally stabilize to withstand the harshest outdoor conditions. It does not rust, rot, or delaminate when exposed to UV rays, water, and humidity. From replacing woods to building boat components and furniture, it is ideal for variety of marine applications. The polymer sheet work like woods and never needs painting or refinishing. It is easy to fabricate with common woodworking tools and techniques.

Features and Benefits of King starboard plastics

• Chemical resistant and easy to clean
• Works like wood
• Very less maintenance
• Environmentally stabilized – waterproof and UV stabilized
• Easy to fabricate
• No finishing or painting required
• No volatile organic compound
• Qualifies for LEED points
• High-impact strength
• Will not rust, delaminate or rot

Maintenance of King Starboard Plastic Sheets

• Mr. clean magic eraser is ideal to clean everyday dirt and stains. Scrubbing should be done lightly as excess force can damage the finish
• A citrus cleaner, alcohol, or spirit can be used to clean petroleum stains such as oil or grease.
• To add an attractive lustre to the finish and hide small surface blemishes, furniture polish or products such as Armor-all can be used. These products should not be used on walking surface to prevent slipping.
• Persistent stains will go away if you soak the area with bleach. 100% chlorine used to treat swimming pools should not be used for this purpose.
• For severe petroleum stains the use of WD-40 should be considered.
• If there are tough marks or stains, the area must be lightly sand. Here only stained area should be worked upon as sanding will remove matt finish.

Common applications

• Frames and trims
• Countertops
• Tray tables
• Hatches and door
• Bow pulpit
• Furniture
• Rod and cup holders
• Grab rails and handles
• Steps and dock boxes

Care and storage

• Keep away from heat sources exceeding 180F
• Store the sheets flat on a level surface
• Parts can be cut form any area of the sheets as there is no grain
• Use of water-based markers or china markers must be used to draw patterns
• Try to keep away from teak oil and other products that can stain the finish

Conclusion

Above mentioned are some of the important things to know about king starboard plastic sheets.