How to Prevent Future Infestation after Termite Pest Control Newcastle

Posted by australianpestspecialists on December 3rd, 2019

Termites are pests that can wreak unimaginable havoc whenever they invade your property. If you have wooden structures and furniture, they may eat through them and destroy every precious piece that you have unless you hire termite pest control, Newcastle. Also, to ensure that you do not have a fresh infestation after the control and extermination of termites, here’s what you can do.

1. Get rid of moisture

Any dampness is a recipe for termite infestation. Since they find anything susceptible to moisture habitable, they can find their way back to your property unless you get rid of the excess moisture. To check on that and avoid costly pest control inspections, Newcastle, repairs any leaking faucets, prevent water from accumulating near your property’s foundation, and keep your gutters clear from clogging.

2. Repair your attic and crawl spaces

Whenever your crawl and attic spaces need repairs, ensure they are repaired as soon as possible. This will help to protect your wooden beams from moisture and rainwater that may make them damp and habitable for termites.

3. Keep your landscape clean

Your landscape can also harbor termites if it is vulnerable to clogging and flood water. Firewood, timber and wood debris, and mulch should be removed from around your property’s foundation since getting them moist may make them a breeding ground for termites. Also, avoid any wood and soil contact, be it for stored wood or wooden fences, and trim any shrubs and trees to keep them from touching wooden surfaces to block any routes for termites.

4. Avoid storing wooden boxes in the garage, attic, and earthen floors

Wooden boxes, unused chairs, and broken wooden items should be removed from the earthen ground, garage floor, and the attic. This will ensure that termites do not find them as sources of food and breeding grounds. Always ensure to keep them to a minimum and store them on higher ground away from moisture.

5. Schedule regular inspections

Keeping the inspection and control teams away may be cost-saving. However, you should schedule regular checks with thermal imaging pest inspectionfor a thorough examination every six or 12 months. An inspector will be essential to help you in spotting signs of fresh infestation.

Lastly, ensure to keep an eye for any signs of termites between inspection schedules. Keep checking for hollow sounding floorboards, mud tubes, and discarded wings.