5 Tips to Keep Your Motorcycle in Top Condition

Posted by Rob A on December 4th, 2019

One of the most essential responsibilities of being a bike owner is making sure that you do the maintenance required by your vehicle. This ensures that it's safe for road use and will last for a long time. If you're interested to learn about the different tips to keep your motorcycle in top condition, continue reading this article.

Change the Air Filter

The air filter keeps the debris out of your bike's parts. If it's clogged, the performance of your vehicle will suffer. You can prevent this from happening by using a motorcycle air cleaner to remove the waste products stuck in the component. If this device is damaged, you'll need to replace it.

Replenish and Replace the Oil

The engine oil is responsible for keeping the components of your motorcycle's engine lubricated. It reduces friction to prevent the parts from wearing out quickly. This fluid also helps cool your bike to avoid overheating during transit.

To keep your machine running smoothly, you'll need to change its oil after it travels a certain mileage. You can check the owner's manual to find this information.

Sustain Tire Pressure and Tread

A simple change in handling your motorbike can indicate that there's something wrong with your tire pressure. If it's under or overinflated, it may become too hard to control. Check its air and threads before you start driving. You have to look for cracks, tears, or holes that could deplete the air. If left unattended, it could cause problems on how you maneuver your bike while you're traveling.

Clean the Chains

The chain transmits mechanical power from one wheel to another. It's also responsible for changing the gears whenever you accelerate or decelerate. Over time, dirt begins to accumulate around its bearings, which can degrade its performance. So, it should be cleaned thoroughly to prevent this from happening.

To clean the chains, here are some steps you can follow:

1. Make sure that your bike is in a secured position by placing it in a center stand.
2. Clean the chains using a cloth and kerosene. Thoroughly wipe it until the grime has been removed.
3. Apply oil for lubrication.

Check the Brake Pads

Brakes are your lifeline whenever you're on the road. They let you slow down and prevent you from accidentally bumping into other vehicles.

Make sure to check the brake pads. If they're already less than 2 millimeters, it might be time to replace them. Don't forget to refill their fluids so that they'll have lubrication. This will prevent its moving parts from making squealing or screeching sounds due to vibrations. It'll also reduce their wear and tear.

These are some tips you can follow to maintain your motorcycle's road readiness. If you need the tools to help you keep your vehicle in top condition, look for shops that sell performance machine air cleaner as they have all the equipment you're looking for.