Do’s And Dont’s In PVC Pipe Coupling

Posted by pooja late on December 24th, 2019

PVC pipe has been made up of polyvinyl chloride that can be used in the different kinds of applications from the plumbing system to cool craft projects. Joining the two ends of the pipe is quite easy while using effective glue especially formulated primer and cement. Most of the customers have preferred the ordinary glue but it will provide you an optimum result.

Before going to begin the joining process, the proper techniques and methodologies need to handle for obtaining the perfect fittings. Still, some people unaware about the using of PVC cement, which is more beneficial. The primer and PVC glue is the most important things to be required for sound fittings. Stay here and read the lines for knowing about the do’s and don’ts in Pipe coupling. 

DO’s: Make A Fast Move 

A pipe coupling is simple and easy if you followed a proper technique and method involved in it. At first, you need to apply a purple primer on the two ends of the pipe and let it only for a maximum of 10 seconds. Then the cement should be applied to that particular area for joining the two ends without creating any type of misalignment. Once the glue is applied to the pipe, then you should start to insert the pipe into the fitting. In case, if the glue begins to dry then you need to reapply it.

Do’s: Twist The PVC Pipe For Perfect Fit 

After the PVC glue is applied effectively, you need to twist the pipe in a quarter of the way for achieving the right fitness. While twisting the pipe, the cement gets started to spread over a pipe and it offers a tight fit. Hold the pipe for at least 30 seconds for avoiding unwanted gaps or some other issues.

Don’t: Never Neglect The Safety Warnings 

While dealing with the PVC primer and cement, the users should be very careful and conscious. Before going to begin your work, you people need to go through the manual given by the manufacturer. Most of the manufacturers are strictly asked you to avoid eye and skin contact for protecting you from unwanted issues and hassles. Therefore, don’t try to break out the protective gloves and safety goggles. A PVC pipe is one of the harmful chemical solvents and so it should be treated with enough safety measures.

Don’t: Leaving Of Jagged Edges 

Once you cut the PVC pipe, it should be prepared perfectly by using the tools and methods established by the manufacturer. If any burrs off the edges present on the surface o the pipe, it will have a chance to damage your skin. You people need to use the utility knife or coarse sandpaper for smoothening the pipe surface. Additionally, while attaching the pipe with burrs can cause compromise the effectiveness of the seal or clogs in the pipes. Before going to join the two ends, the burrs should be removed immediately for avoiding those kinds of hassles.

Read the lines for grabbing the do’s and dont's in the pipe coupling process. People need to evaluate the information given by the manufacturer for obtaining excellent fitness without creating any type of problem.