Roosterfish Half Mounts

Posted by MichealH Alexander on December 26th, 2019

Roosterfish are commonly caught in Central and South America along shorelines and rock structure. Their muscular body makes them the perfect gamefish as they fight extremely hard. . Our Roosterfish half mounts are anatomically correct half fish replicas that are intended to be displayed on the wall. A half sided mount is produced by casting the front part of our two sided wall mount molds. When displayed the circumference of the half mount is either touching the wall or very close to the wall. This process cuts labor and supplies cost and therefore results in a lower price point however the skin texture and finishing process is the same as a traditional full mount. Half Sided Fish Mount Replicas

Roosterfish Half Mount Paint Schedule

We do not custom paint our half mounts but regular paint schedule is to paint the roosterfish "lit up" and alive which is most likely what you are looking for and what most customers really appreciate. Their colors can range from olive green to iridescent blue on their backs with silver sides and long sweeping black markings from back curving down toward tail. The dorsal comb can range from completely black to include yellowish, brown or green streaks. The final step is to clear coat the roosterfish with a UV Protective Urethane clear coat. These beautiful roosterfish are perfect pieces of decoration for your new house, office or Florida room.

Shipping Your New Roosterfish Mount

Our packaging team is experienced and completely understand the importance of superior packaging to ensure a damage free transit. In the event that the shipping carrier decides to run over your package with their truck or something catastrophic happens we will instantly replace the damaged mount and please keep in mind all of our fish mounts come with a money back guarantee.Freshwater Fish Mounts

Installation Of Your Roosterfish Mount

Your new Roosterfish half mount will arrive with a resin hanger attached to the backside of the half mount that runs parallel to the ground. Hold the half mount up on the wall, mark the spot where the hanger touches the wall, drill in a couple screw or hammer in a couple nails and then hang your new Roosterfish half mount. If you are intending to put this outside permanently we do have some additional hardware options. Please contact us prior to ordering to discuss those costs.