Pressure Washing Heavy Equipment

Posted by George Makin on December 26th, 2019

One of the best ways to make money in the high-pressure cleaner is to wash heavy equipment. It’s not necessarily an easy job and it gets pretty greasy, but it’s a constant job and there is a lot. You need to know the different types of equipment and the issues that concern technicians, operators, and owners of preventive maintenance.

Scrapers

The average scraper costs more than $ 250,000. With these monsters, excavation companies can literally move mountains. The incredible size of scrapers and the power required to drive themselves, in addition to all the dirt that these machines move, add to the extremely dirty engine compartments. A small oil leak and dust adheres to the grease, clogging the radiator flanges and causing fire danger and cooling problems.

Scrapers are probably one of the most difficult equipment to clean. Like excavators and larvae mounted on the tower, they are difficult to climb. Its massive size and time to clean them seems to be an impossible task, but allow yourself to take 3 to 4 hours and you want it so clean you can eat it. Take 10 hours and you're ready for fresh paint.

Remember that scrapers accumulate a lot of grease and greasy dirt in the middle where all hydraulic systems come together from https://www.nubirthpressurewashing.com. This happens because of hydraulic leaks or an overly jealous mechanic with a heavy hand on the grease gun. Just get in there and explore everything. You have to remove it by traditional methods first.

Excavators

The average excavator sells for about $ 180,000. Although its concept is relatively simple, it is important to clean it thoroughly. Remove all exterior panels, turn the tower 90 ° and extend the arm forward as much as possible. This way you can clean the arm and all the hydraulic accessories that surround it. The cabin should be thoroughly rinsed and the body cleansed from the bottom and from the inside out, then rinsed to the other side. When completely cleaned, all panels and then soap are replaced, rinsed again and the cabin is detailed. This is a work of three to four and a half hours in a large excavator with a booth.

Excavators

Excavators are some of the most processed equipment in excavations. You can clean everything from huge D-10 bulldozers to an old piece of the John Deere Museum from 1960. Many excavator owners have many equipment, one of which we recently worked with, another 136 seriously heavy equipment used for road construction, cleaning of forests and classification of future residential traces. Most of the major excavation companies have several flood control, hurricane demolition and land-cleaning contracts in five states, so you have to do a good job because the references are endless and you will need to buy more equipment and hire more pressure washing staff for steam cleaning for your business.

A small bulldozer, such as a D-4, can take an hour and a half and a half or three hours to clean, including the cabin. A D-10 or greater can take up to three hours and, if dirty, up to seven. This service includes complete cleaning of triple steam with radiators and 1500 PSI at 6 gpm so as not to bend the radiator flanges. We recommend using a double-point system with 2 angles of 15 °.

An engine in a D-10, if overheated, can cause permanent damage. The new engines cost about $ 55,000.00. You need to take our work seriously and realize that you need to help the owner maintain his equipment. Down time is just as killer in the excavation industry as in the pressure washing industry. Keeping the heavy equipment clean makes it easy to detect hydraulic and oil leaks before they can be repaired before permanent damage occurs. Your ability to help owners maintain such equipment is an important factor in their success.