How to reduce dust on the roll crusher

Posted by posui man on January 7th, 2020

Dust is a problem continually affects the production efficiency of Limestone Mill Processing Equipment crusher in daily use or maintenance process, now we are analyzing this question with expert together. 1) In order to reduce dust caused by air leakage, we often water the entrance when the material is dry in the actual production which intensify the filter bag burnt and feeder blockage.

2) Air goes into a closed dust hood with material when the material on belt conveyor are falling, the dusty gas will proliferate though cover wall cracks and orifices, which causes environment pollution. In addition, due to the belt-corner dust points are set incorrectly, the precipitator makes no effect on the lower belt conveyor, however it's opening or stopping. Therefore, the dust collector never works when the crusher is running, and the dust in lower belt conveyor is always diffusing.

3) When the dust enters into the dust collector pipe, the bend at the inlet increases system resistance and the bend parts are susceptible to be worn and blocked by dust. 4) After being rained or watered, broken material will be of high moisture, the dust particles are thicker than that of dry materials, the bag filter are easy to be burnt and the feeder is easy to plug, which result in bag filter ventilation resistance substantially increased, ventilation capacity decreased and dust aggravated.