How to apply touch up paint in 10 easy steps

Posted by cherry mae on January 11th, 2020

One of the foremost annoying things that you simply ever face maybe a tiny scratch on your shiny car's paint. might be a stone chip or a metal zipper/buckle scratch, or might be the other that ran across the paint to make an eyesore beloved car. The paint gets chipped by flying debris that hits the car’s body while driving. And with the rising menace of bumper to bumper traffic, small accidents can happen.

But this is often not the top of the planet for you. you'll somewhat cover-up that scratch. And you would like to try to that because if it's a deep one chipping off the paint, it could get bigger in time or maybe start corroding the metal through rust formation. All you've got to try to do is buy an appropriate touch-up paint and apply carefully on the scratched surface. Here are a couple of steps powered by Nissan Service Dubai Company of the United Arab Emirates that can guide you through the whole process.

Step 01: Choose the right paint color

First, you've got to shop for the precise color that's on the body of your car. the color code is often found inside the engine bay where the bonnet is hinged. a little metal plate bears the color code for your car. you furthermore may need to purchase a primer that will hold the paint with more strength on the scratch. you'll buy the paint and primer from an automobile store that sells spares.

Step 02: Preparation

Before you begin painting, find an apt location to park your car. Preferred locations would be inside a garage on each day with less humid weather. Also, remember no direct sunlight must fall on the affected area. you ought to also apply a small amount of paint on a separate metal piece to see if the color is matching to the one in your car.

Step 03: Clean the affected area

Wash off the scratch first then dry it with a clean cloth. Use a little piece of sandpaper and rub the surface. this can help strengthen the primer. If the scratch isn't deep enough to show the metal body underneath, it's easier and you'd not even need the primer.

Step 04: Apply primer

Use a little brush to use a sparingly bit of primer on the damaged surface. don't let them reach the first paint. If you are doing catch on the paint, wipe the surface off quickly. Now let it dry for about 12 hours.

Step 05: Paint application

Now you want to apply the touch-up paint that you simply bought. Take a really small brush and apply several layers of the paint on the damaged surface until it evens out with the remainder of the encompassing area. Let it dry off for a few days.

Step 06: Smoothen the affected area

After 3-4 days of the procedure, you'll use a rubbing compound to smoothen the affected area. Just apply the compound and rub it till it becomes even. Finally, clean the whole car and apply polish to end off with a shine.