Atten ST-80 80W Soldering Station

Posted by attentools on January 13th, 2020

● High quality four-core wire heater● Smart recognition of working or non-working status.● Automatic standby, shutdown with smart time setting.● Temperature locking.● Beep alarm function available.● Temperature read out in ℃ and ℉● MCU controlled temperature calibration.● Simulate bar indicating heating up status.● User-friendly menu enables system setting easier.● Separate iron stand to save room and to make easier deposit.● New design with LCD display screen making control visualization.● Buttons(1,2,3) for pre-setting or switching frequently used temperature.● Low-voltage heater separated from power supply to keep soldering work safer.● Soldering tip designed separate from heater and using● Exchangeable 900M series to save use-cost.

https://www.atten.com/products/atten-st-80-80w-soldering-station.html
Specifications:Package list:Standard Packing:
Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional) Main Unit: 1 Unit Inner box: 31.5x27x15.2(cm)
Power:80W Handle set : 1 PCS N.W.: 2.58kg
Heater voltage:28VAC Iron stand: 1 PCS G.W.: 2.81kg
Temperature range:150~480°C AC cord: 1 PCS Carton: 6 PCS/Carton
Temperature offset range:±50°C Manual: 1 Copy Size: 55.5x33x48(cm)
Temperature stability:±2°C (in still air, no load) Cleaning sponge: 1 PCS N.W.: 16.9kg
Temperature adjustment:5 digits (Default)/1 digit (Fine-tuning)   G.W.: 18.0kg
Automatic stand-by time:1-120 minutes (Adjustable)    
Automatic shutdown time:1-120 minutes (Adjustable)    
Heater:80W High quality four-core wire heater    
Tip-to-ground impedance:< 2Ω    
Tip-to-ground voltage:< 2mV

Like it? Share it!


attentools

About the Author

attentools
Joined: April 18th, 2019
Articles Posted: 61

More by this author