Metal Oil Filter Element

Posted by onefilter on January 14th, 2020

This series of filter element is installed in the oil line of hydraulic pressure system to remove the metal powders and other mechanical impurities of various componenets in the hydraulic oil system, maintain the clearance and prolong the hydraulic oil system service life. Low pressure series filter has by-pass valve. When the filter element is not timely replaced, the by-pass valve can open automatically by itself to ensure the normal operation of the whole hydraulic system.
Technical WorkingConditions:
1, Pressure difference: 21MPa
2, Working temperature: －10〜100℃
3, Filtration rate: 5〜20μm
4, Working medium: normal hydraulic oil
5, The filter layers adopt stainless steel micro fiber sintered felt with strong strength, high temperature resistance and anti-corrosion, large dirt-holding capacity, good filtration effect and washable repeatedly.