How to replace headlamp bulbs: 5 easy steps

Posted by cherry mae on January 20th, 2020

You barely concentrate on the headlights bulbs of your car. they're just something that's used when it goes dark. But what that day when it goes dark and therefore the headlamps refuse to decorate your way ahead. it'd not sound that big a priority, but this will be a much bigger problem than it actually sounds. believe it, you can't see what’s ahead of you and drivers ahead don't know if you're behind them. Headlights are a serious safety issue, for you and for fellow drivers on the road.

In the city, you would possibly still do away for a brief stint because the roads are usually lit. However, out on the highway, this problem could find yourself during a catastrophe. And it's not almost one point working, high or low. Both dim and dip are very necessary for nighttime driving. So take a touch time today and check the state of your car’s headlamps. Also, replace it if necessary. The procedure is sort of simple and that we shall outline the essential steps for you to try to to it yourself. Please note that this procedure covers only standard halogen bulbs, and not the HID (High-Intensity Discharge) or Xenon systems.

Step 01: Check the bulb type

Once you've got discovered that the bulb isn't working or maybe some extent is out, you'll get to replace it. you would like to seek out out what sort of bulb your vehicle is provided with. Shuffle through the owner’s manual and you shall find it correctly. If you've got difficulty finding it, ask the spare supplier, they typically have a neighborhood list for multiple manufacturers. [The tips are powered by Nissan Service Dubai Center of the UAE] 

Step 02: Tools required

This is actually such a simple procedure that you simply generally don't require any tools in the least. Because you would possibly get to change a blown bulb at the side of the road in the dark, changing a bulb doesn't require any tools. Keep a clean rag handy to wipe your hands as they rub around the engine bay and you would like to handle a glass bulb.

Step 03: Pull out the holder

Open the bonnet and locate the headlight with the fused bulb. it's a bulb holder with an influence connector behind it. Gently pull out the facility connector. they're usually connected by a plastic or metal catch. The catch features a small lever at the highest, push it and unplug the cable.

Step 04: Remove the fused/blown bulb

After the facility has been disconnected you'll remove the fused/blown bulb out. Remove the wire harness that holds the bulb in situ. Grip onto the holder firmly and slowly pull out the old bulb.

Step 05: Replace with a replacement bulb

Pull out the new bulb from its packaging. confirm you wipe your hands before that. Hold the bulb’s plug end with the clean rag and place it back within the headlight. keep off the wire harness and reconnect the facility cable. you'll even have to regulate the rubber gasket that goes behind the holder to guard the headlight against dust and water. Now test the bulbs functioning. Re-check the fittings if the bulb doesn't illuminate.

Like it? Share it!


cherry mae

About the Author

cherry mae
Joined: January 6th, 2020
Articles Posted: 5

More by this author