Dry Rot Treatment Trafford Steps That You Need To Follow

Posted by digitalmarketing on January 20th, 2020

Dry rot is usually caused by a special form of fungi, which will attack woods initially. If you leave it unchecked for too long, it can easily move right onto plaster and masonry, and impacting the structural integrity of the said place, causing some problems to last long. Despite the name given, dry rot will not just affect the damp timber but can also affect the structural materials as well. Therefore, it is vital to treat the condition from the core and then restructure that place for a better standing.

Not that difficult:

Following the steps will make it pretty easy to remove dry rot. The affected wood needs to be replaced ASAP and the water source ingress must be cut off.

  • Without the help of water, fungus will not be able to grow and eventually begin to die.
  • Just be sure of the Dry Rot Treatment Trafford first and let the experts help you with the guidance for some best and rewarding help in here.

A wood destroying fungus:

Just like experts helping you with Damp Proofing in Stockport, you need them to help you with dry rot treatment as well. Dry rot is mainly a wood destroying fungus and there are some causes behind its growth.

  • The timber’s moisture allows dry rot to develop and it is mainly the result of building fault of some other sorts. Therefore, dry rot is mainly caused due to penetrating damp or leaking downpipes and gutters.
  • On the other hand, your place can be a victim of dry rot because of poorer ventilation and even the rising damp scenario. So, proper damp proofing is a really important step to consider.

The treatment to cover:

The first treatment stage is to find moisture source and fix the fault. After that, you have to determine the extent of the outbreak. Sometimes, you might have to go for Plastering Services Stockport once the dry rot is removed from its core.

  • To check the full extent of dry rot, you better open up affected area by removing plaster and rendering it in all directions.
  • You have to remove the flooring and even the lifting floorboards. That helps you to identify the timbers, well affected by dry rot.

Treatment for wood and timber:

After identifying the infected timber, you have to cutback timbers in-situ to around 500mm beyond last signs of any fungal growth. Then remove all fruiting bodies and all of the visible spores. Clean the walls for removing surface growth. For that, a stiff brush must be used. Repair the timber with the pre-treated one. The sound timber must be treated liberally with dual purpose based dry rot fluid. These fungicides are specially created to kill dry rot and stop any sign of re-infestations from taking place.

Like it? Share it!


digitalmarketing

About the Author

digitalmarketing
Joined: March 7th, 2019
Articles Posted: 85

More by this author