What to Expect From a Specialist during Mold Remediation

Posted by EE&G Restoration on January 24th, 2020

Since Miami has a tropical monsoon climate and considered to be one of the most humid cities in the USA, mold growth is a common problem for its residents and property owners. Thus, the business of mold remediation companies in Miami is getting more and more popular. This raises the need for Miami people to be aware of the right process of mold remediation so that they know their investment is not going in vain. Being familiar with the process may greatly help in deciding which mold remediation company in Miami is right and which one is a scammer. 

Following are the five steps that are taken by the specialist while conducting mold remediation:

1. Determining the Extent of Mold Damage

The process begins with the testing of contamination and checking out the degree of mold damage in the premises by an Indoor Environmental Professional (IEP). Since mold spores are very light and microscopic, they can easily travel throughout the entire building; the professional may collect and analyze samples from affected and unaffected areas. Once the inspection is finished, a mold remediation plan is developed to restore the home to its pre-mold damage condition. 

2. Setting Up the Containment

To ensure that other areas of premises don’t get affected, the specialist will create isolation barriers and set up the containment. After that, the professional verifies the containment by using the technique of low partial pressure differential to test whether there is any air leakage between containment zones. To facilitate exit and entry, chambers are used between the containment zone and the unaffected area. Once the professional verifies the containment and establishes the correct amount of pressure, it’s time to proceed with the removal process. 

3. Removal of Irreparable Material

Porous items that cannot be restored or cleaned effectively are discarded by the professionals. Such items generally include drywall, insulation, and other items that are deeply affected by mold growth. 

4. Cleaning the Contaminated Area

After removing problematic items, the professionals sent by the mold remediation company will begin the cleaning process by vacuuming the contaminated areas with the aid of HEPA vacuum and high-efficiency filter to capture mold spores. Then, a detailed cleaning process begins that involves mold remediation tools such as HEPA filtered sander and wiping the surfaces with damp fiber material using an effective cleaning solution.

5. Verification of Remediation

As the cleaning process is completed, the IEP will come again to test if the mold remediation was successful. The affected part of the building must be returned to the dry standard and visually free from dust and malodors. To establish the fact that the area is back to normal ecology, the IEP may also take surface or air samples as part of the verification process. 

After confirmation that the building is suitable for living/working and mold levels are back to normal, the mold remediation company starts the billing process. So, before hiring any company for mold remediation, take some time to know how they carry out the process of mold remediation and whether the cost it is offering is worth.