Temporary, Quick Fixes For Small Rupturing In Pipes

Posted by Pipe Man Products on February 4th, 2020

You understand the importance of plumbing services when a pipe breaks at odd hours and there’s no one to help you deal with it. If you call somebody after business hours, then you will need to pay extra money for the services. The only remaining option is to do the job on your own. Your job will become easier if luckily, a pipe repair clamp is available to you.

Following are the ways you can attempt to fix a ruptured pipe:

  • Quickly close off your water supply and then switch on the faucet at the lowest point to get rid of the remaining water. Take caution when handling the pipe as it may be more damaged than it actually appears to be .
  • For temporarily fixing small holes, you can use electrical or duct tape by wrapping it around the spot more than a couple of times; tighten the area using hose clamps. This is not a solid fix and should be used to get the time to get hold of a professional who can do a more solid job done.

  • If the hole is a bit bigger, then you can use epoxy putty to cover it. You can also use this putty to fix leakage around fitting joint. Epoxy putty can be bought from a store and requires you to mix together the two components that come with it by kneading them. After cleaning and drying the pipe, wear a pair of gloves and take out a lump of epoxy, knead it and then apply it on the spot and around the hole. Let it dry for the time specified in the packaging and then turn back the water on to look for any leakage issue. Use more epoxy if required.
  • If epoxy putty is not available, you can make use of a piece of rubber, a bicycle’s inner tube, or garden hose by cutting it out as per the hole’s size; cover the hole with any of the aforesaid items.
  • The best solution for dealing with these type of problems is a copper pipe repair clamp. This tool comprises of 2 metal plates and mostly a rubber sheath. In a basic way, pipe clamp works very much the same as hose-clamp solution. Once the hole has been covered with the plates and the surrounding area of the pipe as well, they can be tightened using screws so that the plates do not move off from their place. A lot of the repair clamps can offer lasting solution only if the rest of the pipe doesn’t contain any issues and is in proper condition.

Having JCM repair clamps in your possession is always a good decision, especially if you work or live in an area where bursting of pipe or leakages can occur. It is also advantageous to have repair clamps at home as you never know when issues might arise with pipes. Pipes go down in quality with time and become prone to all sorts of damages.

Like it? Share it!


Pipe Man Products

About the Author

Pipe Man Products
Joined: December 2nd, 2019
Articles Posted: 4

More by this author