Tips for Perfect Plumbing of Fiberglass Inground Pools in Gatlinburg

Posted by specialcarepools on February 13th, 2020

Residential pools are a common sight across the US and Tennessee is no exception. Indeed, many homeowners now have pools where they pass time and take care of their bodies through exercises. However, a keen observation of the pools in residential areas will reveal that some of them are inground while others are above ground.

Inground pools come in different types. There are pools made of fiberglass, which are the easiest to make because everything comes premade. The only thing one needs to do is to sink a hole and install the pool. However, the concrete and plaster pool is the most common. It will not be surprising, for example, to find that all inground pools in Gatlinburg are concrete and plaster based. The reason for this is that concrete is cheap to acquire as compared to a material like fiberglass. In addition, concrete lasts longer.

Nonetheless, residential pools are still opting for fiberglass as the material of choice. In this article, we share tips on how to perform a perfect plumbing job for a fiberglass inground pool.

1. Make use of proper backfill material

Backfill material is the substance that prevents plumping in a fiberglass pool from leaking. Usually, pools carry thousands of liters of water, which implies that the pressure at the bottom of the pool is high. This pressure can become unbearable to the plumping if not properly installed. Different contractors prefer different backfill material but gravel remains the most ideal. This is because it can hold together unlike sand that scatters easily.

2. Perform a pressure test

Any professional contractor knows that pressure builds up and it eventually leads to leaking pools. A good contractor is also aware of the obligation to pressure-test the pools plumbing to seal any leaking holes. Also, pressure-testing enables the contractor to identify areas that might be loosely fit. This way, the contractor is able to preempt any possibility of leaking problems in the near future.

3. Use rigid PVC in plumping

Flexible PVC is weak and susceptible to termite attacks. Once the termites attack the plumping of your pool, the pool will begin experiencing problems related to suction and largescale leakages. On the contrary, rigid PV pipes are termite resistant. Therefore, the plumping is likely to stay intact for the period that the whole structure stands firm. In addition, flexible PVC pipes are prone to collapse due to pressure differences. The scenario is very frustrating to the owner.