Touch screen panels - what\ the difference?

Posted by sere on February 24th, 2020

Today, almost anything can be done with a touch of your finger.

As keyboards and remote controls begin to become irrelevant, touch screens become more and more common.

But how do these touch screens work?

In this article, I will explore three different types of touch screen technologies, with a particular focus on the resistive touch screens, as they are the most costly

Effective choice

Three basic systems three basic touch screen systems are resistors, capacitors, and surface sound waves.

There are several differences in how each system is constructed and their touch screen controllers.

However, the most obvious difference for users is which stimuli will be registered as touch on the screen.

The resistor panel will record the touch from any object as it is based only on pressure.

The capacitive screen will only register for conductive touch (i. e. a finger).

In addition to hard small objects such as the tip of the pen, the Surface acoustic system will record most stimuli.

Not all designs of the resistive touch screen are the same.

Many products require a touch screen with a custom design to meet their needs.

However, the same general design technique is used for all resistance panels.

The system consists of different panels.

The two most critical panels in the system are the resistance layer, located below the surface of the screen, face-to-face to each other, with a very thin space in the middle.

These panels can use two different types of layers: a matrix made of glass or plastic with electrode stripes, or an analog panel containing electrodes without patterns.

When any object touches the screen, these layers are connected at the contact point.

At this point, the touch panel controller registers the touch and first applies the voltage to the other side of the layer, while the other layer senses the voltage at the contact point and then at the top and bottom edges of the other layer.

Through this process, the touch screen controller can send location data to the CPU and explain the exact touch location when touching.

Where is the resistor touch screen used?

Resistance panels can be used almost anywhere: telephone, computer, aerospace equipment, medical equipment, etc.

Because of its high resistance to liquid, the resistive touch screen often appears in restaurants and factories, where leaks are likely to occur.

They also have a cost advantage over other touch screens, which is why they are usually preferred when touch screens are needed.

According to the intended use of the touch screen, the touch screen with customized design has customized

The design panel of the product will be enhanced.

For example, in a medical device like MRIs, image clarity is the most important aspect of the screen.

The high transmission plate is ideal for this kind of work.

However, in military equipment that may be operated outdoors, the low reflector will be a better solution.

Resistance panel technology can even be customized to support multiple

Touch input, can be made with a film that reduces fingerprints, reflections, and line of sight.

The most commonly used touchpad is made of film or glass.

They can be in 4, 5 and 8-

Wire configuration.

Resistors 4 and 5-

Wired touch systems are one of the most popular technologies in smartphones because they are low cost and easy to operateto-

Electronic devices using interfaces.