Car detailing – Get rid from your car dents!

Posted by Definitivecardetailing on March 16th, 2020

To get rid of car dent, most of the people take their car to an auto body repair shop and which goes expensive for some people. Most of the people think that removing car dent is tricky, which gives them a reason to rush for professional hands. However, the alternative option to repair is the household items. The household items like dried ice and hair dyer can be a convenient option to in repairing your car dent. You may also look for the services of Car Paint Correction that will help your car to get the new and perfect look for the car and also it will help to get rid from the car dents.

Identify dents on the car

 The first step that you need to take in removal dent in the process of the Car Detailing Sydney Prices is to identify the portion that needs repairing. This is essential removing in removing small to medium size dent. At this step, you will be surprised to see dents that you haven’t noticed yet. That’s why your car requires a close examination.

Type of dent

Dents on the metal panels of the doors, fenders, trunk, roof, and hood can be effortlessly sort out with these household items. To get the utmost result through Sydney Premium Car Detailing, you should use this method on shallow dents, which don’t have paint damage and occurred in the diameter of 3 inches.

Gathering material

Requirements for car dent removal are compressed air, aluminum foil package of dry ice and the dryer with adjustable setting. You may also need to get the Car Wash Sydney to wash your car and give it a perfect look. The thick rubber gloves are used for handling dry ice in liquid format.

Process of removing dent

1. Switch on your hair dryer and throw out hot air on the dented are for one to two minutes. After two minutes of hot air, set the hair dryer to medium and hold the dryer five to seven inches away from the car surface. Be preventive from overheating of the car surface because it damages your paint.
2. After the heating process, place a sheet of aluminum foil on the dented area. This is done in the order to keep the dented area warm. This step you need to perform, when you are using dry ice on the place of compressed air. This step will prevent your top coat form damage.
3. Remember to always wear thick rubber gloves from injuries, which can occur when you get in contact with the dry ice.

Using dry ice or compressed ice

When you make use of anyone of them, then you will see a rapid change in the surface of the vehicle. When the surface gets heated, you see expansion, and after cooling, you will see the contraction in the surface. In case of dry ice, you need to make use of ice and rub it on the surface of the aluminum foil and keep it on the dented area for few minutes. In case of compressed air, one needs to spray the air on the dented air.