Solutions of sand making machine's common malfunctions

Posted by lily lily on March 23rd, 2020

With the larger and larger demand of the artificial sand and gravel, the sand making machine is widely used. So we should try to improve its processing technology, improve the machine's output and realize efficient working in order to create bigger economic benefit and more developmental opportunity. The sand making machine is suitable to conduct coarse, fine and mediate crushing to hard and brittle materials like all kinds of ores, abrasive materials, cement clinker, quartz stone, iron ore, concrete aggregate, etc.

In addition, we should have a brief knowledge of common malfunctions of sand making machine and have a reasonable solution to the problems in order to keep the whole production line smooth and continuous. Here SBM gives you several suggestions:

1. Sand making machine can be started only without load, otherwise its motor will burn because of too large start-up pressure, and therefore, we should make sure that there is no material before starting sand machine.

2. Any crusher has its applicable scope, and sand making machine is not exceptional, either. The material with too large volume will block its feeding mouth and affect the work of whole production line. Therefore, we should ensure that the materials to be crushed are within the size range.

3. Sand making machine is easy to be damaged after long time of operation, therefore, users must maintain the sand making machine well to prolong its service life.

4. Vigorous vibration can make its screw loose sometimes, as a result, users should check the screw fastening often to ensure that the machine can work safely and successfully.

SBM is a professional sand making machine manufacturer, and it also produces all kinds of mining machines, like crushers, mills, building equipment and ore dressing equipment. if you have any questions, you are welcomed to contact us.