Screen Printing Practices That Will Enhance Your Finished Product

Posted by KolorMatrix on March 23rd, 2020

Before you try screen printing, there are some screen printing practices you should apply with each print run to improve the quality of your products and reduce wasted time and inventory due to misprints. As you look for discount screen printing supplies, you can also use these tips mentioned to avoid frequent printing mistakes and keep your customers happy.

Check the screen printing press between each run.

The bolts that hold your screen printing machine together can come loose with the constant motion of the device. It’s not unusual for the screws that hold pallets and screens in place to loosen when your printing runs. Those loose screws sometimes allow pallets and screens to wiggle during printing, causing blurred prints.

Begin with quality graphics

You won’t achieve a quality screen print if you don’t start with quality artwork. The image you want to print should be of high resolution. If the resolution is too low, the image may seem blurred on the substrate, no matter how well you print it. Similarly, the colors should also be properly segregated. Your product will not have proper registration if you don’t start with accurately separated colors.

Choose the right screen

Different screen printing jobs work for screens of diversifying mesh counts. Usually, printers are sold on one type of screen, however, more accomplished sellers keep various types in their inventory, from the lowest to highest. While the lower mesh count will serve for most jobs, finer screens are required to achieve more detailed screen prints. Make sure you consider your purpose when you look for frame screen printing.

Properly cure your ink

Just running your printed items through the dryer is not sufficient to make sure that they are properly cured. Some inks require heating above 320 degrees to fully cure. Check the manufacturer’s recommended curing temperature when heating. Thicker prints may need more heat for longer, while lighter prints won’t demand as much dry time.

Establish proper off-contact

To get a good screen print on your final product, you should set proper off-contact before you begin printing. Off-contact is the gap between your screen and the pallet underneath. It enables your screen to come smoothly in contact with your substrate while printing and pull cleanly away, which also leaves a precise print behind.

If you want to get the most out of your finished printing products, look for a good frame screen printing, and consider these printing tips mentioned in this guide.

Author: the author is a blogger and the article talks about simple guide to get the most out of your finished printing items.