How To Operate The Petrol Log Splitter Safely

Posted by paer xue on March 24th, 2020

The operator of Lumberjack Log Splitter is a person who touches the machine tightly. The safe operation of the operator is worthy of our attention.  The safe operation of Rapid Splitter operators affects the mass production of mechanical equipment.  What are the safety operation knowledge operators should pay attention to?
1. The feeding and conveying belt conveyor shall be equipped with a valve for controlling feeding, which can not only control the feeding too fast to block the feeding too slowly to affect the power, but also prevent the operator from inadvertently extending his hand into the machine to cause damage.
2.Rapid Splitter's operation is a series of assembly line operations. The operators of the series of processes including feeding, destruction, discharging and nail removal shall perform their respective duties, clearly divide their work and intensify their cooperation to prevent the operation errors caused by too many jobs for one person.
3.Rapid Splitter is operated by multiple motors to complete all the crushing missions. Our power equipment must be equipped with power boxes and guarded by special personnel to prevent the occurrence of power incidents.
4. Chopper Shredder's feeding conveyor insists on dredging. Operators should pay attention to the uniformity and safety of feeding when feeding. If the whole machine is blocked, it will not work, thus affecting the normal operation.
5. Operators of 5.Chipper Shredder should pay attention to the rising height and sensitivity of the pressure roller spring to prevent the material from being too large to feed or blocking during feeding.
6. The hammer head of the crusher, which is the center of the crusher, bears the crushing function of the machine. Therefore, the quality of the hammer head of our Petrol Log Splitter should be ensured. Operators should check the wear degree of the hammer piece on time. When the wear severity reaches our replacement request, timely replacement is required to prevent unexpected risks caused by rebound of powder difficult materials formed due to the non-sharp hammer piece.